The S3 Plus is one of the few unit capable of hashing on a wireless network. These units come with built-in wifi. They do not come with a power supply, and you will need a typical computer PSU with 4xPCI-E 6 pin power connectors. Strictly only 2 PCI-E connectors are required at stock speeds, however it will reduce cable temperatures by utilising all 4. We also need to tell the PSU to always be on, as there isnt a motherboard to do this. Cut a paperclip into a U and insert it into the green wire and either black wire to the side of the green wire. Tape it up for safety. The power supply will now be controlled by its switch on the rear socket.
S3 Plus + Specifications:
Hash Rate: 453 GH/s±5% with great OC potential
Power Consumption: 355 Watt at the wall
Power Efficiency: 0.78J/GH on wall
Power Supply: 12V DC
Size: 331 mm x 137 mm x 160 mm
Fans: Two 14038 fans mounted on both front and back ends
Operating Temperature: 0 °C to 35 °C
Complied with: FCC / CE
Network Connection: Ethernet
Power consumption: This figure depends on the PSU efficiency, ambient temperature and the accuracy of the power meters.
Stand alone: The S3+ mines stand alone, needs no proxy server.
Quiet: The customized heat sinks mounted to the hash boards, one box over S3+ to control the air flow, two fans mounted on both front and back ends that mean fans are able to work at lower speed to dissipate all heat easily. This design let S3+ run at much lower noise level.
Stable: Running 24 hours a day with minimal downtime.
Accurate: Hardware Error got from the sample unit rate is as low as 0.01%, hundreds times better than some competing products.
Efficient: High energy efficiency to save your investment on PSU and electricity bills.
All Antminer orders will have up to 5 days handling time to ship after order has been confirmed