Now with REV6 board 1950watt 110v/240V 80+ Gold Power Supply For S7 & S9 Antminer

Sale!
s9psukit
s9psukit-5s9psukit-1Assemblys9psukit-2s9psukit-3s9psukit-4bkr4x
4.6 out of 5 based on 5 customer ratings
(6 customer reviews)

$179.00 $149.00

110v/120V 80+ Gold Power Supply For Bitmain Antminer S9 or S7 Bitcoin Miner. Include (2) Original HP 1200W & 750W 80+ Gold, (2) X- Adapter REV 4, (10)Pair 14AWG THHN PCIE cables. All PRE Assembled and fully tested. This is the highest quality components on the market, designed for 24/7 mining farm.

9 in stock

SKU: S9PSUKIT Categories: , ,

Product Description

Custom build using the X-Adapter REV 4. "Now with REV6 board" This 80+ Gold PSU kit is pre-wired and fully tested before shipping. Antminer S9 mining at full capacity will consume 1380watts at the wall in this configuration.

All components in this kit, including the PSU, are designed for 24/7 mining operation. They are many Grid-Seed adapter on the market. Only the REV:4 X-Adapter can safely power the Antminer S9 using household 110v/120V .

** Do not attempt this setup using other Grid-Seed Adapter or/and lower quality cables.

Kit includes:

  • (2) Original HP server power supply. (1) 750W (1) 1200W 80+ Gold 120v ~ 240v
  • (10) Pair 14AWG THHN PCIE cables
  • (2) Rev:4 X-Adapter, pre install, wired and tested
  • (4) 3M Rubber foot pads
  • (1) Instruction video

Additional Information

Weight15 lbs
Condition

new

Manufacturer

HP

6 reviews for Now with REV6 board 1950watt 110v/240V 80+...

  1. 5 out of 5

    (verified owner):

    Works as advertised. Staff was friendly and helpful.

    The power connector feeding the controller board on an S7 must be flipped 180 degrees relative to all of the other power connections for the unit to operate.

  2. 3 out of 5

    (verified owner):

    They work fine for this application as long as you don’t make stupid mistakes. I fried one of them because I ran it through an old surge protector that probably isn’t rated for the amount of current that the S7 requires. A higher end power supply would have under voltage protection, so would be more forgiving. The cards show the output voltage, so if it isn’t reading 12, shut it down right away! These are well worth the price and the setup is quick and easy. I bought another set to replace the one I fried, but if I get another miner, I’ll probably go with a modular type power supply that can be used to power another rig when the difficulty on Bitcoin gets too high.

  3. (verified owner):

    I haven’t had any problems since i started running it. It is very easy to setup just plugin the 6 pin connectors and connect the power supply’s to the wall and thats it.

    Overall i am very satisfied with this product.

  4. 5 out of 5

    (verified owner):

    Works great with my S9!
    No complaints..

  5. 5 out of 5

    (verified owner):

    The power supply’s work great it has been running for over 1 week and haven’t had any problems definitely recommend this company.

  6. 5 out of 5

    (verified owner):

    This PSU works and inside your home from a standard 110/120 volt as promised. Great company and now has my trust. Definitely will do business again. Considering purchasing one or two of the S 7’s that are up for sale as well.

Add a review

Your email address will not be published. Required fields are marked *

Got something to discuss?


Customer
Edward
3 months 12 days ago

Such an awesome item and store! Thank you!

Customer
jaardal
15 days 3 hours ago

I purchased this kit and it came with (2) REV 6 X-Adapters and (10) 6-pin to 6-pin 14AWG THHN PCIE cables that were not pre-assembled. Could some post a diagram or video showing how to connect the PCIE cables from the (2) REV 6 Adapters to a single S7 Antminer? Thanks in advance!

Support
15 days 3 hours ago
Customer
jaardal
15 days 3 hours ago

Thanks Joseph! This is a great video but the REV 4 adapter comes pre-assembled. I was hoping to get a diagram of how to plug in the connections to the REV 6, if possible. Thanks!

Support
15 days 2 hours ago

On the REV6 it is simply pushing in the cable into the PCie socket on the REV6 board. Follow the same setup just insert the cable on one end into the REV 6 and on the other end on the S9. Be careful the controller on the S9 PCie connector is reverse position of the hashing board

Customer
jaardal
14 days 11 hours ago

Thanks Joseph for the quick reply. From the video, it looks like there 4 cables needing to be connected to the 750w REV 6 Adapter (#1) but there are a possible 8 PCIE sockets available on the board (U3-U10). I’m guessing it matters which cables go into each PCIE socket on the adapter?

Same with the 1200w REV 6 Adapter (#2). Looks like there are 6 cables that need to be attached to the 8 possible PCIE sockets (U3-U10) on the adapter. I was just wondering which cables go into which PCIE socket for each adapter. Sorry for all the n00b questions. Really appreciate your help.

Support
14 days 8 hours ago

Happy to help 🙂 Try to spread them evenly within the 8 connectors . This is not crucial as each connectors is 12volts.

Customer
jaardal
9 days 12 hours ago

Works great! Really appreciate your help Joseph. Thanks!

 

You may also like…