REV3 Cooled – All Aluminium 12.1 GPU Open Air Mining Case W/ 12 USB Risers + (2) 1200w PSU KIt – ETH, ZEC, XMR, DASH

VER3KADA122400W-A
VER3KADA122400W-A-7VER3KADA122400W-A-8VER3KADA122400W-A-1VER3KADA122400W-A-3VER3KADA122400W-A-4VER3KADA122400W-A-5VER3KADA122400W-A-6VER3KADA122400W-A-2
1.50 out of 5 based on 2 customer ratings
(2 customer reviews)

$789.00

REV3 COOLED – Aluminium 12.1 GPU Open Air Mining Case W/ 12 USB Risers + (2) 1200w PSU KIt – ETH, ZEC. Pre assembled in our shop with a genuine 80+ Platinum 94% efficiency 1200 Watt Power Supply Kit. The power supply is intend to independently power up to 12 GPU. Include 180watt ATX module to power the Motherboard

Out of stock

Product Description

GPU NOT INCLUDED MADE IN USA - ASSEMBLED IN USA

With built-in (6) 120mm 4500rpm fan. Total 1100CFM 

The open frame is made of Anodised Aluminium, super strong and light weight. Pre assembled in our shop with a genuine HP 80+ Platinum 94% efficiency 1200 Watt Power Supply Kit. The power supply is intend to independently power up to 12 GPU. The kit come with (16) 24in 16AWG 6 Pin Male to 8 Pin (6+2) Male PCIE. It can power all high end GPU on the market today. Thous, allowing you to save using an inexpensive ATX power supply for the motherboard other components. The dimensions are 22 x 16 x 20 inches

The cooling system consists of (6) high velocity 12Volt fans strategically placed, pulling cold air for the GPU and pushing hot air out.  The fans are connected to a main board which can be powered by a motherboard fan port OR standard our exclusive PCIE 6pins to molex connectors.

Include:

  • 1x REV3 KADA 12.1 all aluminium frame
  • 12x ITHOO PCI-E Riser cards
  • 12x USB 3.0 50cm cables
  • 12x PCIE to SATA Power Cables
  • 12x PCI-E 6pin to dual 8pins splitter
  • 1x PCIE 6pin to Molex Male
  • 1x PCIE 6pin to Molex Female
  • 1x 180 watt ATX Power Module SKU: CZYDEY180
  • 2x Platinum 94% efficiency HP 1200 Watt Power Supply
  • 16x 24in 16AWG 6 Pin Male to 8 Pin (6+2) Male PCIE cable
  • 90 Day warranty on all parts
  • (6) 4500rpm fan built-in
  • GPU NOT INCLUDED

The GPUs showed in our pictures are not included

Additional Information

Weight 32 lbs
Dimensions 22 x 16 x 20 in
Condition

new

Manufacturer

Centrix

MPN

VER3KADA122400W-A

Got something to discuss?


 

2 reviews for REV3 Cooled – All Aluminium 12.1 GPU...

  1. 1 out of 5

    (verified owner):

    Admittedly this is probably my fault as I am new to this and tried to do it without instructions ( non provided) so i just did what came natural and plugged in the power cords to the riser and the power supply. (they did not send me the 6 to 8 splitters) Plugged the USB into risers and then to the mother board in the card slots. Connected the power to the mother board using the cable provided ( also did not come with the original shipment) The 24 for the power source and the 4 for the CPU. The fans were also connected to the power cable provided. This resulted in my monitor power cord as well as the monitor cable attached to the mother board melting and my mother board catching on fire in under a minute. Not sure what, if any damage was done to five graphic cards I had connected.

    My bottom line is take a good inventory as soon as you receive the product and make sure everything is there. If you do not know what you are doing stay away.

    Other info:
    I had a Biostart TB250 BTC PRO mother board
    Pentium G4400 LGA 1151 processor
    4 1070 video cards
    1 AMD 580

  2. 2 out of 5

    (verified owner):

    The shipping was fast and it was relatively easy to set up. Then the problems started. The board for the fans would not stay attached to the bar it was glued to, so it just dangled there. All 6 of the risers on the top were not functional and only one fan worked. When I contacted support they sent me replacement risers and a replacement control board for the fans even though I said I thought the fans were bad. After I received the replacement control bored and the fans still did not work, they been sent me replacement fans. It is finally up and running , after two weeks. Before I ordered it I emailed support, telling them I needed it to have a little problems as possible because I had the opportunity to build 11 more of these for my investor. Sadly, do to all of the problems, my investor isn’t going to get any more.

Add a review