1500 Watt GPU Mining Rig Power Supply Kit
This GPU mining rig power supply kit is custom built with (2) 750W HP 80+ Platinum Rated Server Power Supplies and features the X-Adapter Version 11 or X6B. These upgraded breakout board adapters allow you to keep your mining setup perfectly synced together. This pretested power supply kit for GPU mining is intended to independently power GPUs and their risers in a 24/7 mining environment.
Also fully compatible with most ASIC miners that require less than 1500W power.
Our Patent Pending Chain Sync Feature through our X11 and X6B Breakout boards is done by connecting the interconnect cable from PSU 1 to PSU2 then PSU 2 to PSU 3. Feature tested with up to 20 PSU in a Daisy Chain; may work with even more PSUs.
GPU Mining Rig Power Supply Kit Components:
HP Server Power Supply Specifications:
- Input: 100V-240V
- Output @ 100-240V: 1500 Watt (2x750)
- Input Connector: C13
- Efficiency Rating: 80 Plus Platinum 94%
Breakout Board Features:
- Electronic on /off switch. Retains its state
- LED indicator lights: Yellow (receiving power) and Green (pushing power)
- LED volt meter display Onboard
- Protective bottom plate
- X6B has 8 PCIe ports, for 6 pin connectors
- X11 has 16 PCIe ports, for 6 pin connectors
6 Pin to 8 Pin PCIe Cable Specifications:
|Connector A||6Pin PCIe Male|
|Connector B||8(6+2)Pin PCIe Male|
- (2) Original HP 750w Server power supply. Platinum Rated.
- (10, 12, 16, 20, 24, 32) PCIe cables, 16AWG THHN 6-pin to 8-pin(6+2)
- (2) X-Adapter Version 11 or X6B
- (8) 3M Rubber foot pads
- X6B / X11 Manual sheet available here as a PDF
- 30-day warranty
POWER CORD NOT INCLUDED.
GPU PICTURE IS FOR REFERENCE ONLY; GPU NOT INCLUDED.