200-240VAC 1500 Watt HP 80+ Platinum 94% Efficiency Chain Sync Open Air GPU Mining Rig Power Supply

Sale!
1500w ZSX
1500 ZSX-1IMG_2992-1IMG_0609684530-201-CertificationIMG_0612IMG_0610IMG_0611X11BRKX7B-DetailsANTPCIE-04 6pin to 8pin PCIe power cables
4.12 out of 5 based on 76 customer ratings
(98 customer reviews)

$129.00$200.00

94% efficient Platinum HP 1500 watt mining rig power supply kit. With proprietary X11, X11-Amp, ZSX or ZSX breakout board; your choice in quantity of 24 inch 6-pin to 8(6+2)-pin PCI-E 16AWG cables; and (4) heat resistant rubber foot pads included.

Clear

Product Description

1500 Watt 94% Platinum 200-240V 8.3A GPU MINING RIG POWER SUPPLY

This HP 1500 Watt Platinum power supply features our X-Adapter X11 (16 port), ZSX(16 Port). Improve your ROI by upgrading your current PSU set up to this 94% Platinum certified PSU. Fully tested before shipping, PSU is intended to independently power ASIC miners or GPU's and their risers in a 24/7/365 mining rig environment. Our Patent Pending Chain Sync Feature through our X11 or ZSXS Breakout boards is done by connecting the interconnect cable from PSU 1 to PSU2 then PSU 2 to PSU 3; feature tested with up to 20 PSUs.

1500 Watt Platinum power supply Specifications:

  • Input: 200V-240V 8.3A
  • Max Output: 1500W
  • Input Connector: C13
  • Efficiency Rating: 80 Plus Platinum 94%

ZSX BREAKOUT BOARD FEATURES:

  • 24Pin ATX Connectors W/ 24in Cable
  • 180watts limit on wattage draw from the 24pins ATX connectors
  • 4Pin Molex Female
  • SATA Power
  • 4Pin or 8pin CPU Power
  • Support up to 140Amp / 1600Watts
  • Electronic on /off switch. Retains its state
  • 16 PCIe ports, for 6pin connectors
  • LED indicator lights: Yellow (receiving power), Green (pushing power) & Blue (Motherboard powered)
  • On-board LED voltmeter display
  • Protective bottom plate
  • Our Patent Pending Chain Sync Feature through our X6B, X7B,  X11, and ZSX Breakout boards is done by connecting the interconnect cable from PSU 1 to PSU2, PSU 2 to PSU 3, and so on. Feature tested with up to 20 PSU in a Daisy Chain.
  • ZSX Breakout Board Manual

X-ADAPTER X11 BREAKOUT BOARD FEATURES:

  • Support up to 120Amp / 1400Watts
  • Electronic on /off switch. Retains its state
  • 16 PCIe ports, for 6pin connectors
  • LED indicator lights: Yellow (receiving power) and Green (pushing power)
  • LED volt meter display Onboard
  • Protective bottom plate

Kit includes:

  • (1) Original HP 1500w Server power supply. Platinum Rated.
  • (0, 8, 10, 12, 16) Pair 6-pin to 6-pin +2pin 16AWG THHN PCIE cables
  • (1) Rev: 11 X-Adapter or ZSX Breakout Board
  • (4) 3M Rubber foot pads
  • X11 Manual sheet available here as a PDF
  • ZSX Manual sheet available here as a PDF
  • 30 day warranty
  • POWER CORD NOT INCLUDED.

Compatible GPU Video Cards (Not Limited to GPU's on this list):

  • Radeon RX 580, Radeon RX 570, Radeon RX 560, Radeon RX 480, Radeon RX 470, Radeon RX 460, Radeon R9 390, Radeon R9 390x, Radeon R9 380, Radeon R9 390x, Radeon R9 370, Radeon R9 295x, Radeon R9 280x, Radeon Pro Duo, Radeon R9 series, Radeon  R7 series, Radeon HD 8000 series, Radeon HD 7000 series, Radeon HD Vega Frontier, Radeon HD Vega 64, Radeon HD Vega 56
  • Nvidia 1080Ti, Nvidia 1080, Nvidia 1070Ti, Nvidia 1070, Nvidia 1060, Nvidia 1050Ti, Nvidia 980Ti, Nvidia 980, Nvidia 970, Nvidia 960, Nvidia 950, Nvidia 780, Nvidia 750Ti, Nvidia GTX 690
  • Any GPU that takes 6pin and/or 8pin PCIe for power

Additional Information

Weight 8 lbs
Manufacturer

HP

MPN

HSTNS-PL33

Condition

new

Max PSU Output

1500W

6+2 pin PCIE cables

+0 Cables, +8 6+2pin PCIE Cables, + 10 6+2pin PCIE Cables, + 12 6+2pin PCIE Cables, +16 6+2 pin PCIE Cables

PSU Efficiency

94%

PSU Efficiency Rating

80+ Platinum

Breakout Board

X11 16 PCIe Port, X11-Amp 16 PCIe Port, ZSX 16 PCIe Port with ATX Power, ZSX-Amp 16PCIe Port with ATX Power

Compatible Voltage Input

100-120V, 200-240V

Got something to discuss?


Customer
cryptosager
5 years 7 months ago

why not make a flexible buying options in your page??? You can add more buying options for other complimentary items such as Y splitter cables, 16AWG 6 pin to dual 8 pin (6+2) cables with different quantity selection. Also a choice of other breakout board like the X12 and a single HP if one is opt to it. To be more customer centric. Since you have available items for sale just provide a separate option for full customized configuration by the customer. It works better for both. This is my suggestion and I will leave the logistics to you.
Thank you.

Support
5 years 7 months ago

Thank you for the feedback. For now the easiest way for a customer to get a fully customized GPU mining kit would be to contact us directly with their specific needs.

I would like to note that the X12 is not an available kit option because it’s incompatible with this HP 1500W PSU.

Customer
cryptosager
5 years 7 months ago

thank you

Customer
Neptune93a
2 years 11 months ago

Still waiting on mine to arrive, just curious how many SATA power cables come with this? I need 6 for the risers. Thanks!

Customer
knute@geekgeni.us
2 years 11 months ago

Hello, can these be used with a dual 24 pin adapter? Looking to replace two ATX PSUs, and wondering how they will be powered on simultaneously.

Customer
dylan-3796
2 years 10 months ago

Hi @Joseph !
Can you suggest, for a 12 gpu rig…what is the best power supply setup if only 120v “normal” outlets are available?
I guess on a single line, with a 20 amp fuse at the fuse box.
Would you chain 2 smaller server psu’s together, each with it’s own breakout board?

Customer
dylan-3796
2 years 10 months ago

Perhaps a 1200w with a 750w, the 24pin breakout board on the 1200 and a smaller board on the 750?

Customer
dylan-3796
2 years 10 months ago

An 1100w linked with a 750w. Then I guess the only concern would be if ~1500w draw on a single 110v outlet/line would trip the breaker at the fuse box or not.

Support
2 years 10 months ago

You can use two 750watt platinum. 1) With the ZSX to power Mboard & a couple of GPUs. 2) With an X11 for the other, link them together with a sync cable. Make sure to calculate your expected watt draw per GPU and do the math to remain at our below 700watt per PSU. The 750 Platinum maximum efficiency is at about 700watt

Customer
dylan-3796
2 years 10 months ago

Should the green light on the back of the PSU light up if the PSU is plugged into a “normal” 120v outlet?

Customer
skelite21
2 years 9 months ago

Hey. I wanna buy one of these maxed out. When will they possibly be in stock about? For e.g a week,month etc. Thx

Support
2 years 9 months ago

We will have stock mid-next week

Customer
aqrs
2 years 7 months ago

I would like to purchase this product, is there any plan to restock?

Support
2 years 7 months ago

We are victims of our own innovation! Once the market sees what we do with PSU’s they raise their prices. We are always looking for quality PSU on the market. Hoping we can source 1500 Platinum PSU at a fair price, soon again.

Customer
aulusflavius
2 years 6 months ago

Is there an estimated date that these will return?

Guest
vsjsmmks
2 years 2 months ago

Does the ZSX amp board work with this psu?

 

98 reviews for 200-240VAC 1500 Watt HP 80+ Platinum 94%...

  1. 5 out of 5

    Viktor (verified owner)

  2. 5 out of 5

    Anonymous (verified owner)

  3. 5 out of 5

    Matthew (verified owner)

    High quality gear!

  4. 5 out of 5

    Alexander (verified owner)

    Fantastic product at a fantastic price, just make sure you have 200-240v where you live! Also read the manual so you don’t brick the PSU, specifically read the ZSX breakout board manual. Doing something dumb like using one molex cable in both molex ports can cause major damage to the board and psu.

  5. 5 out of 5

    Makana A. (verified owner)

    Amazing product with amazing service what else could you ask for? This now is my go to spot for my crypto mining needs 🙂 🙂 🙂

  6. 5 out of 5

    Brian Price (verified owner)

    Quality goods. The answer to power needs.

  7. 5 out of 5

    rsouzadk

    Power cord not included. Where do i get one that is compatible with this psu?

    • Joseph g (store manager)

      We understand the frustrations. Within the industries of mining or IT server, we cannot know if the PSU unit will be used in the USA, UK, NZ, HK, etc. Will it be used on 200-240V, 277V, 100V, or American standard 110/120V? Will it be plugged into a wall outlet or a PDU unit? If a PDU unit, which type of plugs are available on it? Are there any specific local or government laws at the destination address related to PSUs, PDUs, and power cords?

      Each of the countries we ship to use different types of outlet receptacles and so we simply don’t include power cords. That said, we do state in our listing exactly what is included in these kits and the type of power cord required.

      Most of the PSUs will require a C13 power cord, a standard computer power cord that you can source locally. We offer power cords separately here: https://www.parallelminer.com/product-tag/power-cord/

  8. 1 out of 5

    Muhanned S. (verified owner)

    i orderd two and after long delay almost a month, stating that they had a bad batch and they will send me the better batch soon, i recieved one of them damaged.. and sent them an email with no reply yet

  9. 5 out of 5

    John Binns (verified owner)

  10. 5 out of 5

    Genaro Nieto Ormeño (verified owner)

  11. 5 out of 5

    Kenneth Racine (verified owner)

    Worked great, I love working with your company.
    I now have a high confidence level. I will make all future purchases with bitcoin

  12. 5 out of 5

    John A. (verified owner)

  13. 1 out of 5

    Gman

    Missing 8 cables now, need help please from support, can change review after, appreciate it!

    • Joseph g (store manager)

      Gianni, I have an order out for you tomorrow, Fedex 2day air. Sorry about this

  14. 4 out of 5

    barbeau landry samuel (verified owner)

    Love

  15. 1 out of 5

    Gábor (verified owner)

    I got a message from Fedex that they are going to ship my package that day a few days ago. I’ve been calling them for 2 days and sent an email but nothing. The package tracking says that: 9.09 it arrived at Fedex Budapest 9.15 in transit 9.15 at Fedex Budapest it looks like it never even left the warehouse.

  16. 1 out of 5

    Casey Parenti (verified owner)

    I ordered 2 of these and neither one of them are powering on. Not sure what I should do at this point.

    • Joseph g (store manager)

      Casey, these require 200-240AC volts as stated in the listing. They will not work on 110/120

  17. 5 out of 5

    don (verified owner)

  18. 5 out of 5

    leanne smith (verified owner)

    great

  19. 5 out of 5

    Mathew (verified owner)

    Customer service got back to my fast after not receiving my shipping info. Quality was great and everything is in perfect condition. I ordered the wrong voltage but thats ok. Just wish I could use the powersupply

  20. 5 out of 5

    Robert S. (verified owner)

  21. 1 out of 5

    Luism12

    ordered and not turning on tried 4 different cords still no luck i think this could be a great product but i have been trying to find the right cord for ages.

    • Joseph g (store manager)

      Within the industries of mining or IT server, we cannot know if the PSU unit will be used in the USA, UK, NZ, HK, etc. Will it be used on 200-240V, 277V, 100V, or American standard 110/120V? Will it be plugged into a wall outlet or a PDU unit? If a PDU unit, which type of plugs are available on it? Are there any specific local or government laws at the destination address related to PSUs, PDUs, and power cords?

      Each of the countries we ship to use different types of outlet receptacles and so we simply don’t include power cords. That said, we do state in our listing exactly what is included in these kits and the type of power cord required.

      Most of the PSUs will require a C13 power cord, a standard computer power cord that you can source locally. We offer power cords separately here: https://www.parallelminer.com/product-tag/power-cord/

      Please do keep in mind that this PSU requires 200-240V access.

    • Joseph g (store manager)

      One a second thought I take my last reply back. You did get the right power cord! The problem is you are using the wrong voltages!! See the title of this item … 200-240v AC. This PSU is not compatible with 110/120volt

  22. 5 out of 5

    Arunaleswar

    Hi,
    Is shipping available for India?
    How many days it gets to ship?
    Thank you

    • Joseph g (store manager)

      Hi, shipping time is not an issue for India, it gets there quickly. The problem however, is your local custom. We’ve seen lots of problems with Indian customs as such we have stopped accepting credit card payments when orders are ship to India.

  23. 5 out of 5

    Luism12

    great response time btw but yes i have tried 250v as well but idk if it was 250AC is that maybe why

  24. 5 out of 5

    Kevin G. (verified owner)

    Awesome service easy payments system and fast delivery to new Zealand

  25. 5 out of 5

    Mads Rolf (verified owner)

  26. 5 out of 5

    Arunaleswar

    Hi,
    I am from India,
    I have ordered breakout board and cables,
    what happens when it goes to customs,
    what if they block the package?
    Thank you.

    • Joseph g (store manager)

      Unfortunately, it is the responsibility of the importer “In this case, you” to know and abide by your country’s laws. Each country has its own rules & taxes. Some charge huge taxes other not so much. When our customers have difficulty we try our best to apply pressure on the shipping carrier that was chosen. However, like us, they have no power over your government and its laws. If we found that a particular country is becoming harsh on their citizen when importing our products we will remove them from our shipping list to avoid these customers the aggravations.

  27. 5 out of 5

    Mads Rolf (verified owner)

  28. 5 out of 5

    Anonymous (verified owner)

    Works great

  29. 3 out of 5

    Anonymous (verified owner)

    My breakout board didn’t come with the SSD power cable like they said it would

    • Joseph g (store manager)

      Ryan, I see you did order the ZSX and it should have come with it. I’m putting an order in for FedEx Air 2days. It will ship Monday. Sorry about this.

  30. 2 out of 5

    EvilC0P

    Been using this 1200w HP with breakout board for 3 weeks, when it runs fine… it’s good!
    But this is 2nd time in 3 weeks that the system hangs and when trying to boot it, nothing happens but 2 vga cards’ fans will spin and the cpu fan will spin as well but nothing else. I keep unplugging power cable, pico, holding power button to shut it down or turning on/off the switch on the breakout board then boot… after 5-10 minutes of messing around it will at some point boot up properly.
    as i was typing this, i went to try this : i unplugged the ATX et 8pin power to the motherboard for 2 minutes, plugged it back, then it work.
    the unboard meter on the pico was stable showing 12.2

    Any idea why it would do this? how do i prevent this issue? would the new ZSX board be more stable?

    • Joseph g (store manager)

      The pico board is limited at 178watt. All it should power is CPU, Motherboard, and (1) SSD Drive. Anything else should be power from the breakout board. If you reach the limit it will fail. Yes the ZSX is more stable but also as limits on the Motherboard side in the 200watts range

  31. 1 out of 5

    Edmund (verified owner)

    Unit arrived DOA doesn’t power up. Tried reaching out to Tech support, Nothing. Got an RMA was told someone would “review it”, 4 days pass, nothing.

    • Joseph g (store manager)

      Hi Edmund, Sorry for the delay. We have serious issues with staff these days. Are you aware this PSU requires 200AC volt +. It is not compatible with standard 110/120? We will send you a prepaid label to return the item for a refund.

  32. 3 out of 5

    EvilC0P

    thanks Joseph for the reply ; it’s a Z590-P, i3-10100, 1 stick of kingston 8gb ram and a nvme WD SN750 drive.
    i guess i’ll get one of those new ZSX board and see how it goes.

    • Joseph g (store manager)

      Keep me posted. Give me your order number. I will upgrade your shipping to overnight.

  33. 5 out of 5

    Daniel G. (verified owner)

    Great service! Item works as expected and shipped in a timely manner! Thanks!

  34. 5 out of 5

    kevin tiberg (verified owner)

    Great service and fast shipping

  35. 5 out of 5

    Dana Mitchell (verified owner)

    Absolutely perfect. Thanks

  36. 1 out of 5

    Michael Rosa (verified owner)

    Came dead on arrival. Still waiting for reply

    • Joseph g (store manager)

      Micheal, have you noticed the item description beginning with “200-240AC”! This PSU is not compatible with 110/120 AC volt. Please request an RMA from our website to return it for a refund. Thank you

  37. 1 out of 5

    CHRISTIAN RIVERA ALVA (verified owner)

    My package never was received on time and I was not table to receive it.

    • Joseph g (store manager)

      You order on May 24th , we ship May 27th Fedex 787661629818 show delivered June 1. Fedex Proof of delivery “Delivered Package delivered to recipient address – release authorized”

    • Joseph g (store manager)

      FedEx does not take the weekend as working days unless you chose Priority Overnight Saturday Delivery. Monday was a holiday and so your order was delivered June 1.

  38. 5 out of 5

    reelaax (verified owner)

    I received this product, the quality is excellent. Quick two questions, I having some issue with booting the BIOS on my ASUS Prime Z490-P LGA 1200 motherboard.

    1- Is this product compatible with ASUS Prime Z490-P LGA 1200 motherboard?
    2- I did some research and some says that I need 240v to power this up, I want to confirm this from the source, my house is 220v, is this enough to power this PSU?

    Thanks!

    Faisal

    • Joseph g (store manager)

      Hi The ZSX Board is compatible with almost all ATX Motherboards where the CPU does not need it lot of power such as AMD Rizen or Intel Xeon. Yes 220AC volts is perfectly fine

  39. 5 out of 5

    Sebastian Lindstrom (verified owner)

    The best solution I have found so far. Customer service was superb. Shipping was fast. I will soon order more, that’s for sure.

  40. 5 out of 5

    Anonymous (verified owner)

    high quality product, would buy again for expansion2

  41. 1 out of 5

    Marc Rienas (verified owner)

    Dead on arrival. Customer service has done nothing to help in last 40 days. No Option to return on website. Will not be recommending or buying again.

    • Joseph g (store manager)

      Marc, the PSU is dead-on-arrival because you did not read the description of the item or even the title. Look now, at the beginning of the item title “200-240VAC 1500 Watt HP” Yes that is right, 200/240 AC Volts NOT 110/120. Contact me directly using our contact page and I will be happy to give you an RMA number. You can then sent the item back for a refund.

  42. 5 out of 5

    edo

    what is the maximum capacity per-PCIE 6 pin to 6+2 pin? is it 400w? let say if I need to power my 3070 using this power supply then I can use a splitter to powering dual slot 8 pin on the GPU, is that correct?

    • Joseph g (store manager)

      The power limit of any electric cable is base on its size. Here we have 16AWG stranded copper and they are three pairs per PCI-E cable. The extra 2pin are ground. Found the amp rating of 16AWG wires “Chassis rating” multiply the amp rating x 12volt = Watt then multiply by 3 pair. (Amp_Rating X 12) X 3 = Maximum watt per PCIe cable. To be on the safe side of things I would use only 80% of the result so X 0.80.

      Also, take a look at this special cable https://www.parallelminer.com/product/18awg-pci-e-6pin-to-triple-8-pin-3-way-splitter-extension-cable-3x-62pin-cable/

  43. 1 out of 5

    William Sanchez (verified owner)

    I was sent a non-funcional GPU Mining Rig Power Supply and there is no way to get in contact with Parallel Miner. I want my refund.

    • Joseph g (store manager)

      Hi William. Please use our contact page and a ticket will be created. We will reply to you within 48hrs. All our staff works remotely except for shipping. The phone will remain unanswered until life goes back to normal.

  44. 3 out of 5

    sneak1ngb0y

    Will this psu in stock again? What is the estimated availability if possible? Thanks

  45. 5 out of 5

    Gianluca Prevedello (verified owner)

  46. 5 out of 5

    Ramiro (verified owner)

    great service, products, prompt shipping

  47. 1 out of 5

    Grant Clewis (verified owner)

    Thought it ran off 120 v like your 1200w model does

    • Joseph g (store manager)

      The listing is a variation and forces customers to choose an AC voltage, there is only one option 200AC / 240AC. The tile is also very clear about that. We try the best way we can to warn customers about the limitation. In any case, don’t worry we will send you a return label and issue a full refund once return. Please make a warranty request for return.

  48. 5 out of 5

    Billy Ray (verified owner)

    Once you are tired of wasting money on dirty power… Parallel Miner will set you straight!!

  49. 5 out of 5

    Robert M. (verified owner)

    there always the best when u buy from them

  50. 5 out of 5

    Harold B. (verified owner)

    Best in the business! Ultra quick processing times and shipment. All items packaged very neatly and safely. I have been buying all of my server PSU from parallel since I started mining and have never had any issues. Keep up the great work Parallel! You guys rock! As for the PSU I’m running 12x RTX 3070s with this PSU and a 1200watt HP SERVER PSU also from parallel with no issues. The ZSX breakout board makes connecting all my GPUs very easy and convenient. I’m also using their sync cable and fan cables which are also good quality.

  51. 5 out of 5

    William P. (verified owner)

    Excellent product and seller. Everything received super fast! Thanks.

  52. 5 out of 5

    shadi A. (verified owner)

    Good

  53. 5 out of 5

    Victorino Serrano (verified owner)

  54. 5 out of 5

    Anonymous (verified owner)

    Excellent

  55. 5 out of 5

    shadi A. (verified owner)

  56. 1 out of 5

    Melvin Gomez (verified owner)

    The power supply did not turn on or it arrived damaged.

    • Joseph g (store manager)

      This PSU requires 240volt AC and is not compatible with a standard 120volt outlet. As stated in the description. In any case please request a warranty replacement or refund. Thank you

  57. 5 out of 5

    Robert T. (verified owner)

    Great Product! Fast shipping and clear communication from the seller. It works as advertised. This is my third purchase from Parallel Miner and I couldn’t be more pleased. It works with my US 240v outlet. When you compare price vs reliability and performance, no ATX PSU will outperform it. (I have not been compensated in anyway for this review!)

  58. 5 out of 5

    Stanislaw B. (verified owner)

  59. 5 out of 5

    Adriaan Venter (verified owner)

  60. 5 out of 5

    Robert (verified owner)

    This is making my project more efficient. Prompt shipping and as advertised. Awesome.

  61. 5 out of 5

    Anonymous (verified owner)

    Works as advertised. No issues.

  62. 5 out of 5

    Ron A. (verified owner)

  63. 5 out of 5

    Matthijs N. (verified owner)

    Great buy!

  64. 5 out of 5

    Sean Russell (verified owner)

  65. 5 out of 5

    Anonymous (verified owner)

  66. 5 out of 5

    Nancy (verified owner)

    A great all-in-one mining specific PSU

  67. 5 out of 5

    ISAEL L. (verified owner)

    Excellent product and service. International shipping just perfect! Thank you for all.

  68. 5 out of 5

    Kevin Hoyt (verified owner)

    This is an extremely quality product. In my opinion the best power supply I ever had. Thank you so much!!!!!!

  69. 5 out of 5

    Anonymous (verified owner)

    My order was 10 boards and 10 1500w PSU and 160 6PIN tp 8PIn cables. Order was received very quickly within 5 days shipped from USA to UAE.
    The BAD:
    I had my reservation about how the electrolytic capacitors on some boards looked and feared I received some broken units. But they all worked fine apart from one ZSX board.

    The GOOD:
    Customer support to the rescue. This is how Customer Care and support should be. Other business can learn from the team at Parallel Miner.

    A replacement unit was shipped so fast it was difficult to believe. I now know that the team at parallel miner understand the product they sell and more importantly their target market.

    Excellent job.

  70. 5 out of 5

    Henry Schmidt (verified owner)

    Amazing, as expected from this company. Very high quality made with pride in workmanship. Highly recommend. A+

  71. 5 out of 5

    Sebastien C. (verified owner)

    Excellent product

  72. 1 out of 5

    Jesus Padilla (verified owner)

    I never recieved my PSU. Where is it???

  73. 1 out of 5

    Paul Stander (verified owner)

    My part is damaged out of the box. Need to return it.

    • Joseph g (store manager)

      I believed you already reach out to us via our tickets system. Please let us know if you wish to keep the PSU at the discount offered or get a replacement. Thank you

    • Joseph g (store manager)

      Please use the contact us page to initiate a return.

  74. 4 out of 5

    Anonymous (verified owner)

    I received my order the other day. My excitement was dampened when I couldn’t get my rig to work. No fault of your products though, they seem to be working fine. My computer turns on but I get a black screen probably newbie mistake in the installation, will review my steps tomorrow.

  75. 5 out of 5

    Brandon E. (verified owner)

    Really happy with the kit. Super fast delivery. Will be ordering again!

  76. 5 out of 5

    Anonymous (verified owner)

    Ordered 2 of these early in the morning and arrived surprisingly fast the next day for my location!! They are working great, was easy to setup took 5-15min. Definitely gonna be ordering more!!

    Cons: the price went up since the last time I visited the website

    Pros: does it’s job, enough PCIe ports to do a whole set up, depending on your setup, I definitely like the meters to know what’s it’s drawing

Add a review

You may also like…