Product Description
Complete 3.5 TH/s Canaan Avalon6 Miner with AUC2, Controller, and Power Supply Kit
This Canaan Avalon6 miner with power supply kit is ready to be setup by itself or daisy chained with other Avalon 6 miners. You can start mining right after connecting the included components, plugging in an ethernet cable (not included), plugging in computer C13 power cables (not included), and adjusting your network settings.
Because the market price of Cryptocurrency can change overnight when it comes to selling the actual ASIC Miner we only accept Crypto payments. All sales are final.
Although the Raspberry Pi can control 20 units, the AUC2 can only connect 6 units to a Raspberry Pi. You can connect up to 4 AUC2 converters to each Raspberry Pi.
Complete Avalon6 Miner Kit Components
Canaan Avalon6 Miner Technical Specifications
Hash rate | 3.5T±10% |
Power at wall | 1100W (power efficiency 90%). |
Quantity of chips | 80 |
Power connector | 4x 6PIN, all 4 connectors required |
Temperature | Max operating ambient air temp 38℃ |
Controller | Raspberry PI. Each Raspberry PI can control 20 units |
Protection | Machine will not start when the fan is damaged. |
Dimension | 136×150×334mm |
Weight | 4.8kg / 10.6lbs |
Power supply | Minimum 1200W gold power supply recommended |
Communication Interface | IIC / I2C |
Working Environment | 0℃ to 35℃, 10% to 80% relative humidity, non-condensing |
Transport / Storage Environment | -15℃ to 40℃, 10% to 90% relative humidity |
AvalonMiner USB Converter #2 AUC2 Specifications:
The AUC2 connects up to six Avalon6 miners to the Raspberry Pi controller via Micro USB.
AUC2 LED Meanings
- Blue: Initializing or Idle normally
- Green: Working normally
- Red: Communication failed
Raspberry Pi Controller Specifications:
- Raspberry Pi 3 Model B Quad Core 64 Bit 1GB
- includes four USB ports
- pre-assembled in the USA inside a sleek aluminum case
- SD card with with the latest firmware already installed
Please note: The Raspberry Pi controller unit will be shipped with network configurations set to DHCP.
HP Server Power Supply Specifications:
- Input: 100V-240V
- Output @ 100-240V: 1500 Watt (2x750)
- Input Connector: C13
- Efficiency Rating: 80 Plus Gold 92%
X-Adapter X6B Breakout Board Features:
- Support up to 120Amp / 1400Watts
- Electronic on /off switch. Retains its state
- 8 PCIe ports, for 6pin connectors
- LED indicator lights: Yellow (receiving power) and Green (pushing power)
- Onboard LED volt meter display
- Protective bottom plate
6 Pin PCIe Cable Specifications:
Gauge | 16AWG |
Length | 24in |
Max Amperage | 12A |
Max Wattage | 400W |
Connector A | 6Pin PCIe Male |
Connector B | 6Pin PCIe Male |
Complete Avalon 6 Miner Kit Includes:
- (1) Avalon 6 Miner
- (1) 4pin interconnect cable
- (1) AUC2
- (1) Raspberry Pi Controller (RPi 3 Model B)
- (1) SD Card
- (1) Aluminum Case
- (2) Micro USB cables
- (2) HP 750w Gold rated 92% efficient server PSUs
- (2) X6B Breakout Board X-Adapter
- (4) PCIe cables, 16AWG 6pin to 6pin
- X6B Manual sheet available here as a PDF
**POWER CORDS NOT INCLUDED**
Got something to discuss?
You must be logged in to post a comment.
how do i order on this site?
Just click “Add to Cart” We only accept Bitcoin or Bank transfer payment for Bitcoin Miner on Parallel. Credit Card or Paypal are not allowed for these products