AvalonMiner Controller for Avalon 921 Miner

AvalonMiner Controller

$79.00 $59.00

AvalonMiner Controller for Avalon 921. Built with original Raspberry Pi Model B+ w/ latest Avalon 921 firmware installed.

43 in stock

Warranty: 30 Days

Product Description

Avalon 921 Controller built w/ Raspberry PI 3

The Avalon 921 Controller is a Raspberry PI 3 Model B Quad Core 64 Bit 1GB WIFI and includes four USB ports. Each USB port may connect to one AUC3 (not included, but comes with AvalonMiner 921 purchased from Canaan). Each Raspberry Pi can control up to 20 Avalon 921 miners. Pre-assembled in the USA inside a sleek aluminum case.

The controller we send to you will come along with an SD card installed with the latest controller firmware. You can start mining right after plugging in an ethernet cable and adjusting your network settings.

Because of the large memory capacity of the controller, your mining setup will operate reliably. By default there is a “No-WIFI mode” preset, which is the default requirement for large-scale mining deployments.

Package Contents:

  • (1) AvalonMiner Controller (RPi 3 Model B)
  • (1) SD Card
  • (1) Micro USB Cable
  • (1) Case
  • 30 day warranty

Please note: The Raspberry Pi controller unit will be shipped with network configurations set to DHCP.

Additional Information

Weight 0.15 lbs








Got something to discuss?

2 months 4 days ago

Does this Raspberry Pi have heatsinks and a fan installed inside their case? (not just a fan but ALSO heatsinks)

2 months 3 days ago

The model Raspberry Pi used for our Avalon controllers are the Raspberry Pi 3 Model B and does not include heatsinks or a fan installed.

1 month 23 days ago

I am not able to connect to this Ras Pi thru Browser/IP address i found the IP with my IP finder but will not open on browser, any ideas??

1 month 23 days ago

Unless the unit was set to DHCP the default IP is If the unit was set to DHCP then an IP will be assigned by your router. Here what I would do just to eliminate the possibility. Without changing your router settings. Change your LAN adapter on a desktop connected to your LAN to static subnet wait a few seconds, open browser and try If that works, access the setting and change network to DHCP. Reboot the controller and revert the change made to your desktop as well. IF still not working please provide your order# and I will have Albert follow up with you tomorrow.

1 month 22 days ago

You could also try clearing your cookies on your browser or using another browser to see if you can access the Raspberry Pi through it’s assigned IP address.



There are no reviews yet.

Be the first to review “AvalonMiner Controller for Avalon 921 Miner”