Product Description
Bitmain Antminer T9+ 10.5 TH/s ASIC Bitcoin Miner BTC, BCH, LCC
Because the market price of Cryptocurrency can change overnight when it comes to selling the actual ASIC Miner we only accept Crypto payments. All sales are final.
BRAND NEW SEALED Bitmain Antminer T9+ Direct From Manufacturer 10.5TH/s Bitmain Antminer T9+ Miner @ 1432w
Parameters of ANTMINER T9+ |
|||||
| No. |
Parameters |
Value |
|||
| 1 |
Product model |
T9+_10.5T |
|||
| 2 |
Hash chip type |
BM1387 |
|||
| 3 |
Total quantity of hash chips |
162 PCS |
|||
| 4 |
Total quantity of hash boards |
3 PCS |
|||
| 5 |
Total hash rate |
10.5 TH/s ±5% |
|||
| 6 |
DC voltage input |
11.60~13.00 V |
|||
| 7 |
DC current input @12V DC input |
111 A +7% |
|||
| 8 |
DC Power @12V DC input |
1332 W +7% |
|||
| 9 | 220VAC Power @25℃ ,93%
conversion efficiency of APW3 |
1432 W +7% |
|||
| 10 | 220VAC Power efficiency @25℃,93% conversion efficiency of APW3 | 136mJ/GH+7% | |||
| 11 |
Weight（without package） |
4.2 kg |
|||
|
12 |
Operation temperature |
0-40 ℃ |
|||
| 13 |
Storage temperature |
-40-85 ℃ |
|||
| 14 |
Operation humidity |
5%RH-95%RH,prevent condensation | |||
| 15 |
Noise |
76 dB |
|||
| 16 |
Networking connection mode |
Ethernet Cable |
|||
|
17 |
Power connection mode |
All three PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent the control board to be powered up before hash boards be powered up. |
|||
| 18 |
Size(Length*Width*Hight,without package) |
320mm*125mm*190mm |
|||
Please note the following:
1. Power consumption figures will vary with your PSUs efficiency, the ambient operating temperature and the accuracy of the power meter. Figures provided are at the wall, with AC/DC 93% efficiency, and 25°C ambient temp.
2. Required power supply unit is not included. Each hashing board has 3 PCIe power ports; all PCIe ports must receive power. Do not connect more than one PSU to the same hashing board, unless you are using a dual fault protection kit.
3. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to receive power. If you use different PSU for hash boards and control board, please make sure to power the hash boards first.
Robert Weeks (verified owner) –
This order went perfectly, but when I tried to set up online account to buy more stuff, it prevented me. Never did get fixed even though co sent new password. It didn’t work either.
Anonymous (verified owner) –
I found no way on the site to return the item as it was shipped broken.
Joseph g (store manager) –
Login to our site, find your order and request for RMA. Please explain in detail what is the problem. Thank you