Product Description
Bitmain APW3++ Power Supply 1200-1600w 110-240v for ASIC Miner Antminer S7 S9 S9i S9j S9k SE T9
Bitmain APW3++ Power Supply recommended input voltage is 220 V, using anything beyond 380 V will damage the PSU. These are used power supplies that will show signs of wear and tear with dust/dirt. All power supplies are fully tested prior to shipping.
Features
- Input voltage range 100 - 240 V
- Can switch power remotely (to be set up by yourself)
- Active Power Factor Correction, PF > 0.99 (Full Load)
- Highest efficiency up to 93.5%
- Short circuit, overload, over temperature protection
- Speed of cooling fan adjusted automatically with temperature fluctuations
- High power density, only 1.4 U height dimension
- Improvement on thermal layout
| Output
| DC Voltage | 12.15 V |
| Rated Current (220V input) | 133 A | |
| Rated Current (110V input) | 100 A | |
| Rated Power (220V input) | 1600 W | |
| Rated Power (110V input) | 1200 W | |
| Ripple & Noise | < 1% | |
| Voltage Regulation | < 2% | |
| Source Regulation | < 1% | |
| Load Regulation | < 1% | |
| Setup, Rise Time | < 2 S | |
| Power off Protection Trip Time | > 9 mS | |
| Interface Type | 5 pairs of 6 pin PCIE connectors (10 connectors) | |
| Noise Level | < 43 dB | |
| Input
| Voltage Range | 100 - 240 V A/C |
| Starting Voltage | 95 - 105 V A/C | |
| Frequency Range | 47 - 63 Hz | |
| Power Factor | > 0.95 (full load) | |
| Leakage Current | < 1.5 mA 220 V 50 Hz) | |
| Protection
| Low-voltage Input | 80 - 89 V A/C |
| Output Short Circuit | Yes | |
| Output Overcurrent | 134 - 185 A max. | |
| Overheat Protection | Yes | |
| Environment
| Operating Temperature | -20°C - 50°C |
| Operating Humidity | 20% - 90% relative humidity (non-condensing) | |
| Structure | Dimensions | 220 x 108 x 62 mm |
| Cooling | Fan | Forced-air cooling |
Package content:
- (1) Bitmain APW3++ PSU
- 30 day warranty
Reviews
There are no reviews yet.