Product Description
Bitmain APW3+ Power Supply 1600w 200-240v for ASIC Miner Antminer S7 S9 S9i S9j S9k SE T9
Bitmain APW3+ Power Supply cannot be used in countries with a mains power voltage lower than 205V. The PSU will not start below this voltage. And power cord is not included, please find one with at least 10A. These are used power supplies that will show signs of wear and tear with dust/dirt, as shown in the product images. All power supplies are fully tested prior to shipping.
Output | DC Voltage | 12.15V |
Rated Current | 133A | |
Rated Power | 1600W | |
Ripple & Noise | <1% | |
Voltage Regulation | <2% | |
Source Regulation | <1% | |
Load Regulation | <1% | |
Setup, Rise Time | <5S | |
Power off Protection Trip Time | >10mS | |
Interface Type | 5 pairs of 6 pin PCI-E connectors. 350mm length for each PCI-E cable | |
Input | Voltage Range | 176-264V AC |
Starting Voltage | 200-205V AC | |
Frequency Range | 47-63Hz | |
Power Factor | >0.95 (full load) | |
Leakage Current | <1.5mA (220V 50Hz) | |
Protection | Low-voltage Input | 171-181V AC |
Output Short Circuit | Yes | |
Output Overcurrent | 134-150A | |
Overheat Protection | Yes | |
Environment Conditions | Operating Temperature | -20-60°C |
Operating Humidity | 20% - 90% relative humidity (non-condensing) | |
Structure | Dimensions | 375mm*160mm*100mm |
Weight | 2.5kg | |
Cooling | Fan | Forced-air cooling |
Air Blowing Direction | From AC input to DC output | |
Certification | FCC & CE certified | |
Warranty | 30 day warranty |
Package content:
- (1) Bitmain APW3+ PSU
- 30 day warranty
Timmy W. (verified owner) –
It works