Build Your Delta Platinum 94% 1400 watt 200-240v Power Supply Kit For BTC, DASH, LTC BCH Miners

1400W ASIC miner power supply with breakout board adapter and PCIe cables
1400W mining rig power supplymining rig power supply with breakout board adapter and PCIe power cables240V input C13 power cord plugX11 power supply adapter features (16) PCIe ports, LED voltage display, on/off switch, (2) 4 pin ports, and a molex port for all your cryptocurrency mining needsDelta-Dell OEM 1400W Platinum Rating


Platinum Delta 1400watt ASIC miner power supply kit.  With proprietary X-Adapter REV: 11, “Please selected the amount of cable require ” 26inches 6-pin PCI-E 16AWG, (4) heat resistant rubber foot pads included.

SKU: KT-1400BLUE-X7-2 Category: Tags: , , , ,

Product Description

1400 Watt Platinum ASIC Miner Power Supply for 200-240V

Custom build your  1400w ASIC miner power supply kit using the X11 Breakout Board / Cable. Fully tested before shipping. Also compatible with GPU mining rigs when used with our ANTPCIE-Y01 Y-Splitter cables.

Our Patent Pending Chain Sync Feature through our X11 Breakout boards is done by connecting the interconnect cable from PSU 1 to PSU2 then PSU 2 to PSU 3. This feature has been tested with up to 20 PSU, but may work with more PSUs.

ASIC Miner Power Supply Kit Components:

Server Power Supply Specifications:

  • Input: 200V-240V
  • Max Output: 1400 Watt
  • Plug: C13
  • Efficiency Rating: 80 Plus Platinum 94%

X-Adapter X11 Breakout Board Features:

  • Support up to 120Amp / 2400Watts
  • Electronic on /off switch. Retains its state
  • 16 PCIe ports, for 6pin connectors
  • LED indicator lights: Yellow (receiving power) and Green (pushing power)
  • On-board LED volt meter display
  • Protective bottom plate

6 Pin PCIe Cable Specifications:

Gauge 16AWG
Length 24in
Max Amperage 12A
Max Wattage 400W
Connector A 6Pin PCIe Male
Connector B 6Pin PCIe Male
Color White (positive) and Black (ground)

Package includes:

  • (1) Delta 1400watt Server power supply 200-240v ONLY. Platinum Rated.
  • (8, 10, 12, 16) PCIe cables, 16AWG 6pin to 6pin
  • (1) Rev: 11 X-Adapter
  • (4) 3M Rubber foot pads
  • X11 Manual sheet available here as a PDF
  • 30-day warranty


Please note that this power supply is only compatible with 200-240v outlets. This power supply will NOT power on when attempted to plug into a standard 110-120v outlet.


Additional Information

Weight 8 lbs
6 pin PCIE cables

0 Cables X11 Only, + 4 6pin PCIE cables, + 8 6pin PCIE cables, + 10 6pin PCIE cables, + 12 6pin PCIE cables, +16 6pin PCIE Cables

Compatible Currency



PSU: Delta (OEM) Breakout Board & Cables: Centrix



Compatible Voltage Input

100-120V, 200-240V

Got something to discuss?

6 years 1 month ago

Does this PSU use standard c19 to L6-20R power cord?

6 years 1 month ago

No, standard C13/C14 Same as a Desktop computer power cord

6 years 1 month ago

How much power would it be safe to push throught each 6 to 6+2 pins? Planning on powering some 1080ti with those.

6 years 1 month ago

Maximum amps for chassis wiring on 16AWG is 22amps, at 12volt that would give you 264watt per cables. Of course you need to be mindful of your maximum power supply output. Also regardless, if the wire are becoming warm to hot you need to lower the load.

6 years 1 month ago

I need to amend my previous answer. The data is correct. However we need to consider they are (3) pair in a PCIe cable ! Which mean the number would be much higher.

6 years 1 month ago

If i have a 14-50 NEMA outlet, which has 240 volts – Can I use this power supply? If so, what Power cords do I need to purchase?

6 years 1 month ago

Picture the power cord use on the old Desktop computer or Monitor! These are the power cord use for most power supply. Your 14-50 NEMA is use for large appliance or car charger. That wont work unless you use PDU in between. Like this Regardless you will need to convert the 14-50 Nema or find an adapter

6 years 1 month ago

This only comes with the option of 6 PIN PCIE cables. Is it possible to order this but with 6+2 PIN PCIE cables?

6 years 1 month ago
6 years 1 month ago

Thank you!

6 years 21 days ago


1 – Will this support Giggabytes 1080Ti GPU Cards? (

2 – I am building 5 GPU Cards Rig. Is one Power supply enough?

3 – My GPU Card has 6 and 8 Power Pins Inputs on the top. And this has 6 Pins? Will it deliver the power?

4 – Will it power motherboard and components (CPU etc..)?


6 years 18 days ago

Hi Support.. any u[dates on the query….

6 years 17 days ago

Sorry for the late reply. The 1080Ti can consume 335watt when Overclock. Time 5 and you already pass the 1400watt MAX power supply. However if you run them at their default factory setting 250watt X 5 would be ok. The listing here is with 6pin to 6pin cable you will need 6pin to 6pin + 2pin . You can find the same kit with the correct cable under GPU mining category

6 years 15 days ago

Do I need a dual ATX 24 Pin for these, or do you power them on separately from your main MOBO PSU?

6 years 15 days ago

If you use the X11 board you can sync your ATX power supply with it. The X7, X8 will does not have the feature. We will have next week the X6b which will also offer the sync feature

2 years 1 month ago

Hello, is it good this kit for gpu mining?



There are no reviews yet.

Be the first to review “Build Your Delta Platinum 94% 1400 watt... ”

You may also like…