Build Your HP Gold Rated 1200 Watt 110-240v Power Supply Kit for GPU’s Mining – ZEC, DASH, ETH

IMG_3854
IMG_3854IMG_3853240016SET04-412008SET04-2X7BRKIMG_3892

$139.00$199.00

HP Gold Rated 1200watt PSU kit for GPU Video Card Mining. Kit include proprietary X-Adapter  “Please selected the amount of cable require ” 26inches 6-pin to 8-pin(6+2) PCI-E 16AWG, (4) heat resistant rubber foot pads included.

Clear

Warranty: 30 Days

Product Description

Custom built using the X-Adapter  This PSU kit is fully tested before shipping. This PSU Kits is intended to independently power GPU's  and their risers in a mining rig environment..

 

Kit includes:

  • (1) Original HP Server power supply. Gold Rated
  • (8, 10, 12, 16) Pair 6-pin to 8-pin(6+2) 26 inch 16AWG THHN PCIE cables
  • (1) Your choice Rev:6,7 or 8 X-Adapter tested
  • (4) 3M Rubber foot pads

POWER CORD NOT INCLUDED

Please note that this power supply will only produce 1200w of power when connected to a 200-240v outlet. If connected to a standard 110/120v outlet, the power supply will produce a max of 900w of power. Please refer to the label on the power supply for more information.

Additional Information

Weight 8 lbs
6+2 pin PCIE cables

+ 8 6+2pin PCIE cables, + 10 6+2pin PCIE cables, + 12 6+2pin PCIE cables, +16 6+2 pin PCIE Cables

Breakout Board

X6 8 PCIe, X7 12 PCIe, X8 16 PCIe, X11 16 PCIe

Got something to discuss?


Customer
SH4LT1S
2 months 13 days ago

Power cord not included. What connection do I need?

Support
Missa
2 months 13 days ago

We do not included power cord because they are to many variant. Will it be use in USA, UK, HK or in Mexico, Will it be connected to 120V or 220V in a PDU or on the wall! That said, if you remember the old power cord use on Desktop computer or screen Monitor ? These will work perfectly fine

Customer
ndquangminh
2 months 12 days ago

Hi just bought this to power my first mining rig with 6 RX580 GPUs.

Can I combine this HP Server PSU ( for the GPUs) with EVGA ATX PSU ( to power MB, PCIE riser,..) without the need of using 180W adaptor?

Thanks.

Support
2 months 12 days ago

Both can safety operate. however they cannot be link together. Power sequence would be to power firstly our PSU kit then power your motherboard. Your system will detect and initialize all GPU’s. We will release next week the X11 Breakout board. This will have ability to sync your ATX power supply and is compatible with all our existing PSU

Customer
Phillip
26 days 19 hours ago

If I buy the x11 Breakout board, will it work as a plug and play add on for my GPU mining rig? I only have 6 out of 12 GPU installed that are currently using a ATX PSU.

Support
26 days 19 hours ago

Hi Phillip
Frankly their is not much plug & play in the crypto mining world. Everything is painful and usually what ever can go wrong most likely will. That said, the link you provided “1200 Kit with X11” will give you 900 watt of power when using 120volt AC and 1200 watt when using 200volt+ AC. Check your GPU’s power requirement and do the math. You will then know if 6 or less can be power. The X11 work well with any ATX power supply. Make sure to download the PDF manual.

Customer
premprince16
2 months 5 days ago

Hii
Does this power supply get the 24 pin and 8 pin motherboard power connector. And how do i connect the riser sata power cables with this power supply?

Customer
brunosorocaba
2 months 4 days ago

Do you have any eta on when you will have this PSU again? Thanks.

Support
2 months 3 days ago

Working on securing stock …

Customer
brunosorocaba
2 months 3 days ago

Thank you for the quick and good reply! Hope you have always stock. Wish you good sales as well!

Customer
mohdjawi1
1 month 1 day ago

Label on pictures indicates that it only works at 240V ! Not 110V , how come ?

Support
1 month 18 hours ago

Some picture were use with a PSU that was indeed only 200+ AC. I will have a conversation with our staff!. These support both 110 – 240v AC. Thanks for the head up

Customer
mohdjawi1
1 month 13 hours ago

Please confirm with staff, so I can order a few. Thanks

Customer
web@sohotechrepair.ca
30 days 12 hours ago

Out of stock again? Checked last night it was at 65 in stock and was going to buy 5 today.

Support
29 days 21 hours ago

We have stock … Just received 500

Customer
willydarmawanchaniago
24 days 9 hours ago

what is the different of x8 and x11 16 pcie ??

Support
albert.s
24 days 9 hours ago

The main difference between the X11 breakout board and the X8 is that our X11 board has additional features that allows you to sync up multiple power supplies using the X11 board. Please view our listing for more details: https://www.parallelminer.com/product/x11-breakout-board-adapter/

Customer
banoze
17 days 9 hours ago

Hi
What is the length of supplied 6+2 PCIE cables?

Support
Albert
17 days 8 hours ago

The 6+2 pin PCIE cables are 26 inches long. The listing description has been updated to include this detail.

Customer
mrdigicoininc
12 days 4 hours ago

Hi, I’m thinking of buying these with X11 breakout board but i’m a little confused of how to sync this server psu on my Atx psu. I saw a Molex connector on the board, does that used for plugging in one Molex from Atx psu to sync the 2 psu’s together?

Support
11 days 20 hours ago

Hi
The X11 and X6b have a 4pin Molex power connector on them. ALL ATX power supply have 4pin molex power plug for Hard Disk Drive. All you need to do is plug the 4pin Molex power cable from your ATX power supply to the X11 or X6b. When your ATX power supply start it will send 5volts/ 12volt to the X11, the X11 will start. If you power off the ATX power supply the X11 will power off. 🙂

 

Reviews

There are no reviews yet.

Be the first to review “Build Your HP Gold Rated 1200 Watt... ”