Platinum 94% HP 1200 Watt 110-240v Power Supply Kit for ASIC Miner

570451-101
HP 94% Platinum Bitmain Antminer E3 Power Supply 1200 Watt 110-240V ETH ASIC Miner PSUHP 1200W Platinum CertificationIMG_0529120010SET03 Platinum Server Power Supply Kit for Mining, Antminer D3 power supply120010set03-3240032set04-9X6B powered onX11 power supply adapter features (16) PCIe ports, LED voltage display, on/off switch, (2) 4 pin ports, and a molex port for all your cryptocurrency mining needs
5.00 out of 5 based on 4 customer ratings
(4 customer reviews)

$134.00$151.00

HP 1200watt PSU kit for Antminer S3, S5, D3, L3+ and any miner that requires less than 1200w of power at the wall. With proprietary X-Adapter REV:6, 7, 8 or 11, “Please selected the amount of cable” 26inches 6-pin PCI-E 16AWG, (4) heat resistant rubber foot pads included.

Clear

Product Description

1200W Platinum 94% Efficient Server Power Supply Kit for Mining

Custom build your Platinum 570451-101 server power supply kit by selecting the Breakout Board / Cable. Designed and tested to run in a 24/7/365 mining environment. This PSU Kit is capable of powering (1) Avalon6, (2) Antminer S3, (2) S5, (1) D3, and (1)L3+ but is not limited to just these models. Cable options available to power any miner in the market that requires 1200W or less of power at the wall.

For the Antminer D3 and Avalon6, this power supply kit will only work to power up these units when connected to a 200-240v outlet. You will be able to power up the Avalon6 unit when connected to a 110/120v outlet, but you can expect lower hash rates than the advertised 3.5 th/s.

Our Patent Pending Chain Sync Feature through our X6B, X7B, or X11 Breakout boards is done by connecting the interconnect cable from PSU 1 to PSU2 then PSU 2 to PSU 3; feature tested with up to 20 PSUs. These upgraded breakout boards also allow you to remotely manage your set-up via our XRMT-V1 remote management module.

570451-101 Power Supply Kit Components:

Server Power Supply Specifications:

  • Input: 110V-240V
  • Max Output @ 110V-120V: 900W
  • Max Output @ 200V-240V: 1200W
  • Input Connector: C13
  • Efficiency Rating: 80 Plus Platinum 94%
  • Part Number: 570451-101

Breakout Board Features:

  • Electronic on /off switch. Retains its state
  • LED indicator lights: Yellow (receiving power) and Green (pushing power)
  • LED volt meter display Onboard
  • Protective bottom plate
  • X6B has 8 PCIe ports, for 6pin connectors
  • X7B has 12 PCIe ports, for 6pin connectors
  • X11 has 16 PCIe ports, for 6pin connectors
  • X8 has 16 PCIe ports, for 6pin connectors

6 Pin PCIe Cable Specifications:

Gauge 16AWG
Length 24in
Max Amperage 12A
Max Wattage 400W
Connector A 6Pin PCIe Male
Connector B 6Pin PCIe Male

Kit includes:

  • (1) Original HP Server power supply. Platinum Rated.
  • (4, 8, 9, 10, 12, 16) PCIe cables, 16AWG 6pin to 6pin
  • (1) Rev: 6B, 7B, 8, or 11 X-Adapter (Please note Chain sync and remote managed features not available with the free X8 breakout board.)
  • (4) 3M Rubber foot pads
  • X6B / X7B / X11 Manual sheet available here as a PDF
  • 30-day warranty
  • POWER CORD NOT INCLUDED.

Please note that this power supply will only produce 1200w of power when connected to a 200-240v outlet. If connected to a standard 110/120v outlet, the power supply will produce a max of 900w of power. Please refer to the label on the power supply for more information.

Additional Information

Weight 8 lbs
6 pin PCIE cables

+ 4 6-pin PCIE cables w/ X6B for Avalon6, + 12 6-pin PCIE cables w/ X11, +16 6-pin PCIE cables w/ X11

Max Wattage @ 100V

800W

Max Wattage @ 110-120V

900W

Max Wattage @ 200-240V

1200W

Manufacturer

HP

Condition

new

Got something to discuss?


Customer
brunosorocaba
6 years 3 months ago

Hi. Do you have an ETA to have it available again? Thanks.

Customer
sblack
5 years 9 months ago

So, is this PSU just not as good as the DPS-1200FB-1 A? I ask because up until recently switching to 220v, I ran my DPS-1200 on 110/120v with no drop from the advertised hashrate on my Avalon6 until ambient temps got to 35+⁰C.

Support
5 years 9 months ago

When heading to temperature of 35+⁰C your ASIC or GPU’s are more effected then the PSU can ever be. Here why, PSU have a build-in overheat protection. If reached, the PSU will shut off, just like hair dryer does. Once the temps cool off the PSU will start again. Miner on the other hand will continue mining but their hash rate will drop a lop.

Support
5 years 9 months ago

Also, platinum PSU “REAL PLATINUM; many vendors online offer Platinum when in fact they are gold. Platinum manage heat much more efficiently then a GOLD. When a GOLD PDU reach max heat and shut down a platinum will continue much further. On HP PSU Platinum can be recognized easily by looking at their AC plug socket. It will always be BLUE in color. If black they are gold not Platinum.

Customer
sblack
5 years 9 months ago

Thanks for the info. I guess my main concern was if this was not as good as the DPS-1200FB-1A that I currently have. Thanks

 

4 reviews for Platinum 94% HP 1200 Watt 110-240v Power...

  1. 5 out of 5

    Anonymous (verified owner)

  2. 5 out of 5

    Steve G. (verified owner)

    Great quality, fast shipping.

  3. 5 out of 5

    john Harper (verified owner)

  4. 5 out of 5

    Anonymous (verified owner)

Add a review

You may also like…