Lite-On Bitmain Antminer DR3 Power Supply 2200 Watt (2×1100) 110-240V ASIC Miner PSU 80+ Gold 92% Efficiency

S9 Hydro Power Supply

$199.00 $119.20

LiteOn 2200W 200-240V Antminer DR3 Power Supply Kit. 80+ Gold Includes (2) Lite-On 1100W PSU (2) X6B Breakout Board (10) 6pin to 6pin 16AWG PCIE Cables

50 in stock

Warranty: 30 Days

SKU: KT-BDR3-2200CB10SET03-X6B Categories: , , Tags: , , , , , , , , , GTIN: 719826778863

Product Description

Bitmain Antminer DR3 2200 Watt (2x1100) 110-240V Power Supply Kit

The Lite-On 2200 Watt Antminer DR3 Power Supply kit is built using our X-adapter revision X6B and 2 Lite-On 1100W PSU. Designed and tested to run in a 24/7/365 mining environment. Our Patent Pending Chain Sync Feature through our X6B, X7B, or X11 Breakout boards is done by connecting the interconnect cable from PSU 1 to PSU2 then PSU 2 to PSU 3; feature tested with up to 20 PSUs. These upgraded breakout boards also allow you to remotely manage your set-up via our XRMT-V1 remote management module.

Bitmain Antminer DR3 Power Specification:

  • 1410 watt at the wall

Antminer DR3 Power Supply Kit Components:

Server Power Supply Specifications:

  • Input: 110V-240V
  • Output @ 110-120V: 2046 Watt (2x1023)
  • Output @ 200-240V: 2200 Watt (2x1100)
  • Input Connector: C13
  • Efficiency Rating: 80 Plus Gold 92%

X-Adapter X6B Breakout Board Features:

  • Support up to 120Amp / 1400Watts
  • Electronic on /off switch. Retains its state
  • 8 PCIe ports, for 6pin connectors
  • LED indicator lights: Yellow (receiving power) and Green (pushing power)
  • LED volt meter display Onboard
  • Protective bottom plate

6 Pin PCIe Cable Specifications:

Gauge 16AWG
Length 24in
Max Amperage 12A
Max Wattage 400W
Connector A 6Pin PCIe Male
Connector B 6Pin PCIe Male

Package Contents:

  • (2) Lite-On 1100W server power supply
  • (10) PCIe cables, 16AWG 6pin to 6pin
  • (2) Rev: X6B X-Adapter
  • (8) 3M Rubber foot pads
  • X6B Manual sheet available here as a PDF
  • 30-day warranty

Additional Information

Weight 12 lbs








Breakout Board

(2) X-Adapter X6B

PSU Input


PSU Output @ 110-120V

2046W (2×1023)

PSU Output @ 200-240V

2200W (2×1100)

PCIE Cables

(10) Pair 6-pin to 6-pin 16AWG THHN PCIE cables

PSU Input Connector


PSU Efficiency


PSU Efficiency Rating

80+ Gold

Got something to discuss?

2 years 23 days ago

If I use the dual fault protection (to prevent my dr3 from getting damaged), how do I power on two power supplies on at the same time?

2 years 23 days ago

The dual fault protection cables renders the on/off power button inoperative; turn both of the PSUs on and off by inserting or removing the power cords.

2 years 23 days ago

Won’t it damage my antminer if the power cords are not plugged in or taken out at the same time?

2 years 23 days ago

No, the dual fault protection cables ensure that when power is cut to one PSU, power will stop being sent to the second PSU. I will note that there may be a few moments for the second PSU to turn off because the stored electricity needs to drain. We’ve tested the dual fault cables thoroughly here with our own miners and have not seen the miners harmed in any way.

2 years 23 days ago

Since a hashboard must be connected to one psu, one of the power supplies will need to power 2 hashboards. I calculated that one psu will need to power 930 watts to the two hasboards, is that enough if it is on a 120 volt outlet?

2 years 22 days ago

Does one psu hook up to two of the hasboards, and the other to one (because there are 3 hashboards)?

2 years 22 days ago

Each PSU has a maximum output of 1023W on 110/120V. You would power the control board and one hashing board on one PSU while the remaining two hashing boards would be powered by the second PSU.



There are no reviews yet.

Be the first to review “Lite-On Bitmain Antminer DR3 Power Supply 2200... ”

You may also like…