110v/120v For Antminer D3 ~Now with REV7 board 1950watt 110v/240V 80+ Gold Power Supply

5.00 out of 5 based on 1 customer rating
(1 customer review)

$159.00 $129.00

110v/120V 80+ Gold Power Supply For Bitmain Antminer D3 Miner. Include (2) Original HP 1200W & 750W 80+ Gold, (2) X- Adapter REV 7, (10)Pair 6-pin 16AWG THHN PCIE cables. All PRE Assembled and fully tested. This is the highest quality components on the market, designed for 24/7 mining farm.

13 in stock

Warranty: 30 Days

SKU: D3PSUKIT Categories: , , ,

Product Description

Setup & install on D3: 750watt on(1) hashing board and the controller | 1200watts on (2) hashing board. Power sequence should be 1200watt first then 750watt

"Now with REV7 board" This 80+ Gold PSU kit is pre-wired and fully tested before shipping. Antminer D3 mining at full capacity will consume 1200w at the wall in this configuration.

All components in this kit, including the PSU, are designed for 24/7 mining operation. They are many Grid-Seed adapter on the market. Only the REV:7 X-Adapter can safely power the Antminer D3 using household 110v/120V .

** Do not attempt this setup using other Grid-Seed Adapter or/and lower quality cables.

Kit includes:

  • (2) Original HP server power supply. (1) 750W (1) 1200W 80+ Gold 110v ~ 240v
  • (10) Pair 6-pin 16AWG THHN PCIE cables
  • (2) Rev:7 X-Adapter, pre install, wired and tested
  • (4) 3M Rubber foot pads
  • (1) Instruction video

Additional Information

Weight 15 lbs




Got something to discuss?

24 days 3 hours ago

I did some research about powering a single antminer D3 with two PS and , turns out if there were any power surges in my home network , it may damage the Antminers bord !? correct me if i’m wrong , thanks in advance

23 days 21 hours ago

The D3 and or S9 or S7 are populated with three hashing board and one controller. Damaged can happen if you were to power a single hashing board with TWO power supply. Here, with a D3 you would power one hashing board with a 750 and controller and two hashing board with a 1200. In this configuration if a power supply fail no damage will occur. The hashing will simply be powered off

23 days 6 hours ago

Makes perfect scene , thank you already ordered .

14 days 24 minutes ago

Are these 110 only or 110 / 220?

13 days 21 hours ago

They support both 110/120 and 208/240.

12 days 14 hours ago

does the kit include power cords

Missa Beisel
11 days 18 hours ago

None of our PSU kits come with a power cord. We don’t know which country the customer is in or what voltage they have access to. We do not want anyone to damage their units by using a mismatched power cord.

7 days 3 hours ago

How do you set up the power supply? Mine didn’t come with instructions

6 days 20 hours ago

https://youtu.be/vFScbUaKtT8 you can refer to this video for instructions. Although the breakout board and cable design has changed since we created the video, the set up is still the same. In short you want to use 6 pcie cables with the 1200w power supply to power up 2 hashing boards, and the 750w power supply will use 4 pcie cables to power up the remaining hashing board and the main controller board.

6 days 14 hours ago

great video. thank you so much


1 review for 110v/120v For Antminer D3 ~Now with REV7...

  1. 5 out of 5

    (verified owner):

    excellent product

Add a review

You may also like…