Product Description
2400 Watt ASIC Miner Power Supply 94% 200-240V
This 2400 Watt ASIC Miner power supply kit is built using a certified Delta 94% Platinum server power supply and our 16 port X8 breakout board.
Improve your ROI by upgrading your current PSU set up to a more efficient unit. On top of enjoying a more efficient power supply, you can also take advantage of the increased reliability this PSU provides. Unlike standard ATX power supplies, these are intended to power ASIC miners in a 24/7/365 mining environment.
Most noteworthy, the DPS-2400AB has a voltage output of 12.5V which allows any miner to perform at higher, more consistent hash rates.
2400 Watt ASIC Miner Power Supply Kit Components:
Server Power Supply Specifications:
- Input: 200-240V ~ 13.6A 50-60Hz
- Output: 2400W Max
- Number of Power Slots: 2, Common Slot
- Efficiency Rating: 94%
- Input Connector: C20 (C19 cable required)
X-Adapter X8 Breakout Board Features:
- Support up to 200Amp / 2400Watts
- Electronic on /off switch. Retains its state
- 16 PCIe ports, for 6pin connectors
- LED indicator lights: Yellow (receiving power) and Green (pushing power)
- LED volt meter display Onboard
- Protective bottom plate
6 Pin PCIe Cable Specifications:
Gauge | 16AWG |
Length | 24in |
Max Amperage | 12A |
Max Wattage | 400W |
Connector A | 6Pin PCIe Male |
Connector B | 6Pin PCIe Male |
Package Contents
- (1) Delta DPS-2400AB
- (1) 3ft C14 to C19 PDU Cable
- (2) X-Adapter X8 Breakout Boards
- (10) 6pin to 6pin PCIE Cables
Popular ASIC Miner's Power Consumption:
Antminer S9
- 1127W (11.5TH/s batch)
- 1225W (12.5TH/s batch)
- 1274W (13TH/s batch)
- 1323W (13.5TH/s batch)
- 1372W (14TH/s batch)
An Antminer S7 mining at full capacity will consume 1293W +/- 10% at the wall in this configuration.
The A3 mining at full capacity will consume 1186 W +7% at the wall.
The D3 mining at full capacity will consume 1200w +/-7% at the wall.
The E3 mining at full capacity will consume 800w +/- 10% at the wall.
The L3 mining at full capacity will consume 400W +/- 10% at the wall.
The L3+ mining at full capacity will consume 800W +/- 10% at the wall.
The R4 mining at full capacity will consume 845 watt +/- 9% at the wall.
The V9 mining at full capacity will consume 1027W +/- 10% at the wall.
The X3 mining at full capacity will consume 550W +/- 10% at the wall.
Avalon miner power consumption is as follows:
The Avalon 6 Mining at full capacity will consume 1050 watt +/- 10% at the wall.
The Avalon 721 mining at full capacity will consume 900 watt +/- 15% at the wall.
The Avalon 821 mining at full capacity will consume 1200 watt +/- 15% at the wall.
The Avalon 841 mining at full capacity will consume 1290 watt +/- 15% at the wall.
Baikal miner power consumption is as follows:
The Baikal BK-X mining at full capacity will consume 120-630 watt +/- 10% at the wall, depending on which mining algorithm is used.
The Baikal Giant X10 mining at full capacity will consume 120-630 watt +/- 10% at the wall, depending on which mining algorithm is used.
The Baikal BK-B mining at full capacity will consume 210-410 watt +/- 5% at the wall, depending on which mining algorithm is used.
DragonMint miner power consumption is as follows:
The DragonMint B29 mining at full capacity will consume 900 watt +/- 10% at the wall.
The DragonMint B52 mining at full capacity will consume 1380 watt +/- 10% at the wall.
The DragonMint T1/16T mining at full capacity will consume 1480 watt +/- 8% at the wall.
The DragonMint X1 mining at full capacity will consume 245 watt +/- 10% at the wall.
The DragonMint X2 mining at full capacity will consume 490 watt +/- 10% at the wall.
Innosilicon miner power consumption is as follows:
The A4 Dominator mining at full capacity will consume 1000 watt +/- 10% at the wall.
The D9 mining at full capacity will consume 900 watt +/- 8% at the wall.
The S11 mining at full capacity will consume 1380 watt +/- 8% at the wall.
The A5 mining at full capacity will consume 750 watt +/- 8% at the wall.
The A4+ mining at full capacity will consume 750 watt +/- 8% at the wall.
Pinidea miner power consumption is as follows:
The DR-100 Mining at full capacity will consume 900 watt +/- 5% at the wall.
The DR-100 Pro mining at full capacity will consume 900 watt +/- 5% at the wall.
The RR-200 mining at full capacity will consume 350 watt +/- 5% at the wall.
The RR-210 mining at full capacity will consume 350 watt +/- 5% at the wall.
Reviews
There are no reviews yet.