Tripp Lite 5.76kW Single or Dual Phase ATS/Switched PDU 208/240V 30A PDUMH30HVATNET


$799.00 $219.00

Can be use with normal home electric service

Output Capacity Details5.76kW (240V), 5kW (208V), 4.8kW (200V) total capacity / 30A max (Agency de-rated to 24A), 24A max per L6-30R outlet; 20A max per breakered outlet bank; 16A max per C19 outlet; 12A max per C13 outlet

Output Receptacles(16) C13; (2) C19; (1) L6-30R

Out of stock

SKU: PDUMH30HVATNET-PULL Categories: , Tags: , , , , ,

Product Description

Tripp Lite 5.76kW Single or Dual Phase ATS/Switched PDU 208/240V 30A PDUMH30HVATNET

PDUMH30HVATNET features a built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.


  • 208/240V 30A Automatic Transfer Switch (ATS) / Switched PDU (Agency de-rated to 24A continuous)
  • ATS features provide redundant power for critical network equipment with a single input power cord
  • 2 digit display reports output power consumption in amps
  • 2U horizontal rackmount form factor; 12.5 in. / 31.8 cm depth
  • 19 built-in switched outlets (16 C13, 2 C19 & 1 L6-30R)
  • Set of two 10 ft. / 3m NEMA L6-30P input cables support connection to separate PRIMARY and SECONDARY inputs
  • ATS circuits normally maintain output sourced from the primary input cable. As primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable
  • ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS with zero transfer time similar to Tripp Lite SmartOnline series)
  • Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported
  • On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source
  • Super-fast switchover between primary and secondary power sources occurs in 2-6 milliseconds
  • Switched outlets and ethernet interface supports individual outlet control on a real-time or programmable basis and user-specified alarm notification thresholds for all reported site power conditions
  • LX Platform interface allows full remote access for power monitoring with email notifications via secure web browser, SNMP, telnet or SSH
  • Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities
  • Outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup
  • Front panel LEDs confirm power availability on both input lines and for each output receptacle
  • Included cord retention brackets keep vital network equipment plugged in and continuously powered
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

PDUMH30HVATNET Specifications

UPC Code 037332159601
PDU Type Auto-Transfer Switch; Switched
Output Capacity Details 5.76kW (240V), 5kW (208V), 4.8kW (200V) total capacity / 30A max (Agency de-rated to 24A), 24A max per L6-30R outlet; 20A max per breakered outlet bank; 16A max per C19 outlet; 12A max per C13 outlet
Frequency Compatibility 60 Hz
Output Receptacles (16) C13; (2) C19; (1) L6-30R
Output Nominal Voltage 200; 208; 240
Overload Protection Includes two 20A output circuit breakers; Breaker 1 controls the upper row of 9 outlets (8 C13, 1 C19); Breaker 2 controls the lower row of outlets (8 C13, 1 C19); L6-30R outlet is unbreakered
Customized Load Management Receptacles Each outlet is individually controllable via remote interface
PDU Input Voltage 200; 208; 240
Recommended Electrical Service 30A 208/240V
Maximum Input Amps 30.0
Maximum Input Amps Details Agency rated to 24A continuous
PDU Plug Type (2) NEMA L6-30P
Input Cord Details Set of two inputs connect to separate PRIMARY and SECONDARY power sources
Input Cord Length (ft.) 10
Input Phase Single-Phase
Front Panel LCD Display Digital display reports output amps in 4 separately metered loading segments (BANK 1: Outlets #1-9; BANK 2: Outlets #10-18; BANK 3: Outlet #19), whole-PDU output kW load level and input voltage on primary and secondary input lines
Front Panel LEDs 19 LEDs display power on/off status for each outlet, plus 2 LEDs for power status on Primary and Secondary input connection and three additional LEDs to label the displayed numeric value as Amps, kW or Voltage
Switches ENTER and MODE switches toggle the digital display to show output amps (Banks 1-4), total kW output and input voltage (primary, secondary)
Minimum Required Rack Depth (inches) 16
Unit Dimensions (hwd / in.) 3.5 x 17.5 x 12.5
Unit Weight (lbs.) 13.70
Material of Construction Metal
Form Factors Supported 2U rackmount
PDU Form Factor 2U; Horizontal
Storage Temperature Range 5 to 122F (-15 to 50C)
Relative Humidity 5 to 95% (non-condensing)
Operating Elevation (ft.) 0-10,000
Operating Elevation (m) 0-3000
SNMP Compatibility Pre-installed SNMPWEBCARD provides remote monitoring and control via Java-free HTML5 web interface, telnet, SSH and SNMP management systems
Certifications Tested to UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS Complaint, TAA Compliant


Additional Information

Weight 35 lbs



Tripp Lite



Got something to discuss?

8 months 15 days ago

Couple of Questions:
1. I see these are used, do you have any info on their condition? How long were they in use?
2. In the Description under “USER INTERFACE, ALERTS & CONTROLS” I see mention that the Digital Display can toggle between Amps, kW and Volts, specifically “whole-PDU output kW load level”. This would be really valuable for us as we can’t get a read out on the wattage of our rigs when running them over 220v because the KillaWatt doesn’t work with 220v. Will this PDU allow us to measure the wattage of our rigs plugged into it in a way similar to the Killawatt?




There are no reviews yet.

Be the first to review “Tripp Lite 5.76kW Single or Dual Phase... ”