X7 Breakout Board Adapter Compatible With 750W to 2400W Server Power Supplies

Sale!
12 PCIe Port Server Power Supply Common Slot Adapter Breakout Board
4.00 out of 5 based on 5 customer ratings
(9 customer reviews)

$29.00 $7.99

Built-in (12) PCI-E connectors on board for quick easy connect. 160Amps rated. It can power ASIC Miners as well as GPU

95 in stock

Warranty: 30 Days

SKU: X7BRK Category: Tags: , , , , , GTIN: 719826775329

Product Description

X7 - 12 PCIe Port Breakout Board Adapter Compatible With HP, Delta, Dell 750w / 1200w / 1500w / 2400w Power Supplies

Power supplies capable of 2400 watts output can sell for hundreds of dollars. While all are third-party names and often low quality made in China, server accessory excess allows the market to acquire original TOP QUALITY power supplies at a fraction of the cost. The problem with server power supplies is their proprietary Common Slot connectors. The X adapter solves this problem and allows the power supply to be used for other applications such as Crypto mining, RC hobby, drones or and powering high current 12v devices.

Fully tested before shipping.  Combined with the quality of an HP, Delta, or Lite-On server PSU, the X-Adapter REV7 was designed to withstand the harsh cryptocurrency mining environment 24/7/365. Combine this adapter with a server power supply to use with ASIC miners and GPU mining rigs to mine bitcoin and other crypto currencies.

PCIe Adapter Board Specifications:

  • Support up to 160Amp / 1900Watts
  • Mechanical on /off switch. Retains its state
  • 12 PCIe ports, for 6pin connectors
  • LED indicator lights: Yellow (receiving power) and Green (pushing power)
  • On-board LED voltage meter display
  • Protective bottom plate
  • Adapter designed to work with Common Slot (CS) server power supply units

Pictures with cables or other items are for reference only.

Confirmed Compatible Power Supplies:

  • DPS-460EB A | HSTNS-PD14 | HSTNS-PL14
    • 499249-001, 499250-101, 499250-201, 511777-001, 503296-B21
  • HSTNS-PL23B | PS-2461-6C1-LF
    • 591553-001, 591555-201, 599381-001
  • DPS-460MB A | HSTNS-PL28 | PS-2461-7C-LF
    • 643931-001, 643954-201, 660184-001, 656362-B21
  • HSTNS-PR28-AD | HSTNS-PL28-AD | 7001613-J100
    • 746071-001, 748279-201, 748279-301, 742515-001, 739252-B21
  • DPS-750RB-A | HSTNS-PL18
    • 506821-001, 506822-201, 511778-001, 512327-B21
  • DPS-750RB-A | HSTNS-PD18
    • 506822-101, 506821-001, 511778-001, 512327-B21
  • HSTNS-PL12
    • 449838-001, 449840-001, 454353-001
  • DPS-750AB-4 A | HSTNS-PD31
    • 674890-001, 666375-101, 674275-B21
  • DPS-750UB B | HSTNS-PD22B
    • 591556-101, 591554-001, 599383-001, 593831-B21
  • DPS-750AB-3 A | HSTNS-PD29
    • 643932-001, 643955-101, 660183-001, 656363-B21
  • HSTNS-PL29-AD | PS-2751-7CB-LF
    • 746072-001, 748281-201, 742516-001, 739254-B21
  • HSTNS-PL34 | PS-2751-9C-LF
    • 697579-001, 700287-001, 697554-201, 697581-B21
  • DPS-1200LB C
    • MVKTR-LF
  • DPS-1200FB A | HSTNS-PD11
    • 440785-001, 438202-001, 438202-002
  • HSTNS-PL30
    • 643933-001
  • DPS-1200FB-1 A | HSTNS-PD19
    • 570451-001, 570451-101, 579229-001
  • DPS-1200SB A | HSTNS-PD30
    • 643933-001, 643956-101, 660185-001, 643956-201, 656364-B21
  • HSTNS-PL33 | PS-2152-1C-LF
    • 684529-001, 684530-201, 704604-001, 684532-B21
  • DPS-2400AB

Full breakout board compatibility list.

Additional Information

Weight0.25 lbs
Condition

new

Manufacturer

Centrix

MPN

X7BRK

UPC

719826775329

Got something to discuss?


Customer
a320rfo
2 years 1 month ago

Hi
Is this the same board as used in the Delta DPS-2400AB 2400watt PSU “kit”?
It seems to be but the spec does not list compatibility with the DPS-2400AB. I want to buy some Deltas, but I would like to get a spare breakout board for them.

Support
2 years 1 month ago

Hi – The X5,X6,X7 & X8 are compatible with the 2400watt. The X8 will be release next week. It is 16 PCIe connectors

Customer
a320rfo
2 years 1 month ago

Will the X8 be offered as part of the Delta DPS-2400AB 2400watt PSU “kit” ($159 at present)?
Or is the only way to get it in a 2400W setup by separately ordering the DPS-2400AB +X8 + PCIe connectors separately?
If so: (1) I don’t see the same connectors advertised on your website
(2) is the $59 DPS-2400AB exactly the same as the one in the kit (it mentions “DPS-2400AB REV:01F”).

Support
2 years 1 month ago

We will create kits using the X8 with the Delta 2400W & HP 1200Watt and 750Watt. The X8 will be fully compatible. As always having more port does not increase capacity. 2400watt is 2400watt divided by 24 or 32. “is the $59 DPS-2400AB exactly the same as the one in the kit” Yes they are exactly the same.

Customer
Michael
2 years 1 month ago

Hi, just got this, it was working great. Then I unplugged and moved it 5′, now the yellow led is on and no power to gpu’s. Any ideas? Also, what are the led numbers. I had 12.6 on one side and 12.9 on the other.

Customer
Michael
2 years 1 month ago

Scratch that, had a plug in backwards. Thanks for making it so I didn’t kill myself.

Customer
Yars
2 years 23 days ago

Hello, is it compatible with 438203-001

Support
2 years 23 days ago

Yes it is

Customer
thomashwood
1 year 11 months ago

what kind of lubricant should used with these boards?

Support
1 year 11 months ago

Anything viscous .. The idea here is to prevent bending the breakout pin when inserting the board. If noting available use your saliva !

Customer
email4reg
1 year 11 months ago

Hi, is this board compatible with the Delta DPS-1500AB power supply?

Support
1 year 11 months ago

No it is not

Customer
jayeshkavathe
1 year 10 months ago

By any chance, is this compatible with Dell D1570P-S0 using 240V?

Customer
Digidigm
1 year 10 months ago

Support what does “Retain its State” actually mean? Thanks in advance.

Support
1 year 10 months ago

The power on or off button will retain its state on power failure. IE: The X6 board as an electronics on/off switch, if a power failure occur once the power is return the X6 will be OFF. That can be a huge problem for someone miles away.

Customer
robtsmith88
1 year 9 months ago

Does this support the 570451-001?

Customer
joychakma
1 year 9 months ago

Are either X7 or X6 board compatible with hp 1400 watt platinum plus 720620-B21/754383-001/733427-001?

Support
1 year 9 months ago

No they are not .. But we will have X11 coming out nest month. That will be

Customer
robtsmith88
1 year 9 months ago

Does this fit the HP Common Slot Platinum Power Supply Kit – power supply – hot-plug – 1200 Watt – 656364-B21?

Customer
pcbacon
1 year 9 months ago

Do you guys also sell or have any suggestions on where to buy pcie male to sata connectors? so I power my risers with the break out board

Customer
jogar0917
1 year 9 months ago

Hi, my GPU has 8 pin, can I use this breakout board with 6 pin source?

Support
1 year 9 months ago

Hi – PCie connectors are standard 6pins. So are our breakout board. The extra 2pin requirement on GPU’s are ground. You will need cables that are 6pin to 6pin + 2pins, On parallel these cable are always Yellow & Black – Like this one https://www.parallelminer.com/product/24-inch-16awg-6-pin-male-to-8-pin-62-male-pcie-power-cable/

Customer
brummettx
1 year 8 months ago

How would you test this breakout board for power? I have it paired with a 2400w psu and it stays in standby even when the power button is pressed. No readout on LED screen either. Thanks,

Support
1 year 8 months ago

Assuming you are using our Delta 2400watt. They are two power bar on that PSU. One side is master and the other slave. Only the master side control the on / off

Customer
brummettx
1 year 8 months ago

Yes i am using Parallel Miner DPS2400AB. Which side is the master and slave? I have installed your breakout boards on both sides master and slave and tried the push button to no luck. Would phone support be the next step?

Support
1 year 8 months ago

This PSU can only be use with 200-240volt. Not compatible with 120v. Suggest to unplug all PCIe cables and try starting the PSU. If this work then most likely their is a short somewhere within your setup. If the unit is still not turning on and you are indeed connected on 200Volts send us a message via the contact page and we will process return for replacement or refund

Customer
senkunban
1 year 8 months ago

is compatible with Dell D1600E-S0?

Support
1 year 8 months ago

No it is not .. However the X11 due to be released within days is. Stay tuned, the X11 as features never seen in the industry

Customer
Thader
1 year 8 months ago

Hi,
Is this board compatible with the DELL PS-2142-2L / Y53VG or the DELL DPS-1200MB A / D1200E-S1?

Support
1 year 8 months ago

No… We’ere about to release the X11 which will be compatible with the Y53VG

Customer
Dmnchild
1 year 8 months ago

I was also curious about this.

robtsmith88
1 month 17 days ago

Does this fit the HP Common Slot Platinum Power Supply Kit – power supply – hot-plug – 1200 Watt – 656364-B21?

Support
1 year 7 months ago

Yes the X7 is compatible so is the X8 and the new X11 soon to be release

Customer
SH4LT1S
1 year 7 months ago

Does it support 579229-001?

Customer
snowfall
1 year 7 months ago

Hi
This breakout can be used on LITEON PS 2112-5L, 1100W?

Support
1 year 7 months ago

By the pictures it hard to tell. I feel our X11 might have a better chance. If you have a unit on hand we would be happy to send you a sample for test. Just let me know your result. Send me a message via the contact us page.

Customer
thevaibhav.arora
1 year 7 months ago

Does the board do any kind of voltage regulation. I bought 18 of these to power 6 rigs..

Power output ranges from 12.4 to 12.7.. I always assumed power output was direct from the PSU, but if i plug a different board into the same PSU it report different voltage..

What is the acceptable voltage range ? most site say upto 12.6V

One of the capacitors on the risers blew, it was really loud and activated the smoke alarm.. i have turned all rigs off to try and determine if its an bad riser or something to do with the voltage..

Support
1 year 7 months ago

Voltage on the breakout board would need to be calibrate first to give an accurate reading. If you want to know exactly the voltage it best you use a volt meter. Riser blew up is most likely the result of a bad riser. Check the PCIe voltage output on the break board directly. Also check the voltage output rating on your PSU. Sone PSU like our 2400watt are rated 12.5volt. Trust me the extra .5 volt for ASIC miner is GOLD

Customer
jeraldsullivan
1 year 7 months ago

So.. does this not come with the cables?

Support
1 year 7 months ago

No, we have them available in our accessories

Customer
aiko
1 year 7 months ago

Hey, so does this work with the DPS-1200FB-1 A? Should, since you’re offering that exact PSU in your shop…

Support
1 year 7 months ago

Yes the X7, X8 and X11 are compatible

Customer
jminer2048
1 year 6 months ago

Will this work with HP DPS-750RB A . PN:506822-101 ?

Support
1 year 6 months ago

Yes they are compatible

Customer
Techgtv
1 year 6 months ago

Anyone elses board that does not retain it’s state after power loss? For the first 10 seconds if power comes back everything is fine, but after this it does not power on without me phyiscally hitting the switch.

Support
1 year 6 months ago

You may have a defective board … Log on your account and request an RMA

Customer
decentral
1 year 6 months ago

I have two 750w with two of these breakout boards that I would like to sync. How would I do it?

Support
1 year 6 months ago

The X7 does not have the sync feature. Only the X11 and soon to be release X6b

Customer
David
1 year 5 months ago

Will this work with the IBM DPS-2000BB?

Support
1 year 5 months ago

No it will not

 

9 reviews for X7 Breakout Board Adapter Compatible With 750W...

  1. 3 out of 5

    :

    Captcha code broken on the discussion. Always says ‘invalid’.

    The one that you provided with the frame does not “retain it’s state” when I switch the plug socket off. Does this one?

    • :

      hello,
      the x7 will retain it’s state in the event of the power lost.
      regards

      Gabriel

  2. 2 out of 5

    :

    Plugging these in is almost impossible. I ordered two of these with a delta 2400 psu and bent about half of the pins. After bending them back into place I finally got it to work. Unfortunately after moving my setup, they no longer want to work. I get a solid orangish LED light and no power.

    • :

      Jerimiah,
      We can send you replacement, send us a message via Contact us. PLease apply a small amount of lubricant on the PSU, wipe the excess. Prior to inserting the X7 board.

  3. 5 out of 5

    (verified owner):

    Works as advertised. A bit stiff to insert, but not impossible (no, I didn’t use lube) . In my rigs, when used with the 24″ PCIe cables sold here and the ATX module, these allow for extremely tidy cable management.

  4. 5 out of 5

    :

    I have the version 7 breakout adapter. My power supplies are 438202-002 and 506822-201. How do I connect the 2 rev7 boards to my antminer s9?

    • :

      Using PCIe cables, you would power two hashing boards with the 1200W PSU while powering the control board and third hashing board on the 750W PSU.

  5. 5 out of 5

    :

    Does it matter which connectors on the x-adapter power which connectors on the hashing boards?

    Is there an optimal distribution within the x-adapter connectors?

    Was the idea with the 2 power supplies (1200w and 750w) to run the s9 on 110 volts assuming the s9 using about 1400 watts per unit at 14TH, splitting the load between 2 power units at a lower than rated efficiency?

    Can I just buy a newer breakout board w the sync capability for my power supplies (no cables, no psu)?

    • :

      Hi, I would spread them as evenly as possible simply to avoid heat build up in a specific area of the board. For you second question. Here, it is very important no hashing board get powered by two separate PSU. Unless you would use our fault protection cable on the X6b. The 750watt should power (1) hashing board and the main controller board, the 1200 will power the two other hashing board. Power sequence should be first the 1200 then the 750. For you last question, i’m not sure exactly what you mean but the X6b, X7b and X11 are backward compatible. Which mean if you are currently using the X6,X7,X8 you can also use the new version board

Add a review

You may also like…