HP Power Supply Kit for (1) Antminer D3 DASH Miners – 94% Platinum High Efficiency 110-240V

Antminer D3 power supply
120010set03-4Assembly120010set03-1Antminer L3+ Power Supply Kit120010set03-3HP 1200W Platinum Certification

Original price was: $214.00.Current price is: $53.60.

HP 1200 watt server power supply. HE ~ Platinum High Efficiency at 94% capable of powering (1) Antminer D3 DASH Miner. Power supply kit includes proprietary (1) X-Adapter REV:8, set of (10) 26inches PCI-E 16AWG, (4) heat resistant rubber foot pads.

Out of stock

SKU: KT-120010SET03-BLX8 Category: Tags: , , , GTIN: 719826775664

Product Description

HP 1200W Antminer D3 Power Supply Kit

HE ~ Platinum High Efficiency at 94% capable of powering (1) Antminer D3 DASH Miner. Custom built using the X-Adapter REV 8. This Antminer D3 power supply kit is fully tested before shipping. This kit is not only limited to the Antminer D3 DASH Miners, but can power anything that requires power via PCIe cables and no more than 1200W.

An Antminer D3 DASH Miners full capacity will consume 1200 watt at the wall with this configuration.

Bitmain Antminer D3 Power Requirements:

  • 1200W (+/- 7%) at the wall

Please note that there are two versions of this miner. The second version is 19.3GH/s and consumes 1350W (+/- 7%) at the wall.

Antminer D3 Power Supply Kit Components:

Server Power Supply Specifications:

  • Input: 110V-240V
  • Max Output @ 110V-120V: 900W
  • Max Output @ 200V-240V: 1200W
  • Input Connector: C13
  • Efficiency Rating: 80 Plus Platinum 94%

X-Adapter 8 Breakout Board Features:

  • Support up to 200Amp / 2400Watts
  • Electronic on /off switch. Retains its state
  • 16 PCIe ports, for 6pin connectors
  • LED indicator lights: Yellow (receiving power) and Green (pushing power)
  • LED volt meter display Onboard
  • Protective bottom plate

6 Pin PCIe Cable Specifications:

Gauge 16AWG
Length 24in
Max Amperage 12A
Max Wattage 400W
Connector A 6Pin PCIe Male
Connector B 6Pin PCIe Male

Kit includes:

  • (1) Original HP 1200W server power supply. Platinum Rated.
  • (10) PCIe cables, 16AWG 6pin to 6pin
  • (1) Rev:8 X-Adapter, tested
  • (4) 3M Rubber foot pads
  • 30-day warranty


Additional Information

Weight 15 lbs








Got something to discuss?

6 years 6 months ago

Can I power the MOBO cpu 8 pin socket directly from this unit, specifically the x7 breakout board? I am re-posting here as I posted my same question on the 24 pin power module unit.

If so do you carry a 6 pin to 8 pin cable?

Thanks in advance !

6 years 6 months ago

In theory it would be possible but I would not suggested. That power should come from an ATX power supply or an ATX adapter such as this one https://www.parallelminer.com/product/180watt-max-24pin-atx-power-module-included-sata-molex-cpu-power-connectors-ditch-your-atx-power-supply-entirely/

The CPU power work in pair with the motherboard power. Having separate control source on these would just increase failure point and we all try to avoid them.

6 years 5 months ago

Can you get this kit with the 6+2 pin cables rather then the 6 pin?

6 years 5 months ago

Check under GPU’s kit .. You will find similar with the cable 6pin+2



There are no reviews yet

Be the first to review “HP Power Supply Kit for (1) Antminer... ”