Parallel TVN6100 Fan, 6100 RPM PWM Variable Speed 260CFM 2.8A 12V 120mm x 38mm

TVN6100 6100 RPM FAN 120mm x 38mm
TVN6100-1TVN6100-2TVN6100-3TVN6100 diagram
4.71 out of 5 based on 70 customer ratings
(75 customer reviews)

Original price was: $24.99.Current price is: $15.99.

Rated speed (range) 6100±10%RPM Maximum air flow 260 CFM

537 in stock

SKU: TVN6100 Category: Tags: , , , , , , , , , , , , GTIN: 880929877675
Qty Discount - 6+ 50 cents off each | 12+ $1 off each | 24+ $1.50 off each

Product Description

TVN6100 6100 RPM Fan Upgrade 260 CFM  for Antminer ASIC miners and GPU rigs

The high-performance TVN6100 6100 RPM fan upgrade for Antminer and most other ASIC miners will keep your mining operation cool and efficient. The 4-Pin fan boasts an upgraded speed of 6100 RPM, an incredible Air max flow of 260 CFM, and operates at 12V.  ASIC Miner Fan has an expected life span of 60,000 hours. Idle for a rigorous environment of a 24/7/365 mining operation.

Compatible with Bitmain and most other 120*120mm ASIC miners. This fan is also great for cooling your open air mining rigs.

Improvements Over Factory Fan

  • Dual ball bearing 6100 RPM
  • Max Air flow CFM: 260
  • 60,000 Hours life expectancy 24/7
    • Tested at 40℃ in 15-65% humidity
  • 90-day warranty included

TVN6100 6100 RPM Fan Upgrade Specifications:


  • Dimension: 120*120*38mm
  • Weight: 370g
  • Frame: Black PBT (Polybutylene terephthalate) plastic
  • Bearing System: Dual Ball Bearings
  • Impeller: 11 fan blades
  • Cable length: 10 inches
  • Power Connector: 4pin
  • Function/Features: PWM control/Speed Sensor


  • Rated voltage: DC12V
  • Rated current: 2.8±10%A
  • Power consumption: 30Watt
  • Operating voltage: 10.2 - 13.8V


  • Rated speed (range) 6100±10%RPM
  • Maximum air flow 260 CFM
  • Maximum air pressure 21.5 mmH2O at zero air flow


  • Operating temperature: -10℃~+70℃
  • Storage temperature: -40℃~+75℃
  • Operating humidity: 5 to 95% RH

Life expectancy: 24/7 continuous operation 60,000 hours


**Please Note**
If you are replacing your lower RPM fan with our TVN6100, please keep in mind that the noise level will increase and the fans may produce a small amount of vibration due to the high rate of air flow spinning at 6100 RPM. If you want to reduce the noise level, we recommend lowering the fan speed. 85% fan speed will produce approximately 5600 RPM, 70% ran speed will produce approximately 5000 RPM.

Additional Information

Weight 0.4 lbs








Cable Length

10 inch (25.4cm)

Max Fan Speed

6100 RPM

Maximum Air Flow

260 CFM

Connector 1


Life Expectancy

60,000 Hours



Got something to discuss?

3 years 3 months ago

I received one of these and when I plugged it into the sys_fan header on my mobo it was pulsing consistently, repeating between low and medium RPM every second. Is there a certain amount of power draw this expects that a normal mobo couldn’t supply?

Daniel Kaufman
3 years 1 month ago

these draw about 2.5 amps from the spec and the mobo header is about 1 amp…you are lucky if you don’t burn out the header.

Elliott Marshall
3 years 2 months ago

Will the ZSX Breakout Board had enough power to power theses? I want to use 10 of these in my gpu mining case, but not sure how much power draw will be required

3 years 11 days ago

Could you add metric units for the airflow and add watts consumption too in the product description ?

It may help a lot of customers specially neophytes in computer/electronic hardware and save a lot of time for the others who are of doing calculation and conversion every time.

Something like:
12V at 2.8A = 33.6W
260CFM = 7.3m³/min or 438m³/h

I know the fan industry loves CFM but for people outside the US, we do not have a single clue how much airflow it does represent in reality.

Thanks in advance.

2 years 10 months ago

Any idea when these will be back in stock?

2 years 10 months ago

I’m putting the item back into stock now

2 years 10 months ago

I miss spoke. We are sold out but have a shipment coming in next week. We have allowed backorder on them

2 years 10 months ago

How is this controlled through the ZSX Board? Is there a knob for adjustment?

2 years 7 months ago

Hi Joseph, is this fan the identical same type as –

I see no difference between the two units, unless I am mistaken?

2 years 7 months ago

Hi Renze9. The exact same item, market in different ways. We are currently very low in stock but expecting a few thousand back in stock this month. I have synced the price; thanks for the heads up.

2 years 7 months ago

Thanks Joseph. Can these fans be connected to the ZSX-AMP board for power? Then from the ZSX-AMP, use the 4-Pin PWM Fan Cable for ZSX Board to Motherboard Chassis Fan Port? Would it pose a problem if I wanted to connect all 10x fan headers on the ZSX and then use the 4-pin PWM fan cable to motherboard?

2 years 7 months ago

Yes, but be mindful the TVN6100 is like 2.5amps I would not put more than (5) on the ZSX Fan hub side

Pavel Litorovich
2 years 7 months ago

For a mining rig how do you control the speed? Obviously, you cannot just plug them into 5V fan socket on your motherboard since this bad boy draws twice the current your mobo can handle. Also, can you plug it in into 5V socket on X20 board which is normally used for syncing? It produces enough voltage, but I am not sure if it can handle 2.5amps. Thanks!

2 years 4 months ago

I have a zsx board how many of these can I hook up? I have 12 gpu mining frame possible to have 10-12? my psu is 2000 watt dell server psu from these and I have tons of head room as my gpus are 12 1660 supers.

2 years 3 months ago

Do these come with mounting screws?

2 years 2 months ago

I have rigs with normal ATX boards, and my PSUs don’t have ZSX boards. How else can I run these??
Looking for ideas.

2 years 2 months ago

You can connect them your motherboard fan port or Purchase a separate Fan Hub

2 years 2 months ago

Pretty sure the 34 watts would be too much for a regular motherboard. And most hubs only handle up to 1A fans.
Would be great if there was a fan board that let you hook up like 6 fans to a PCI-e power connector.

2 years 2 months ago

This will work on the antminer S19 Pro 110 TH?

2 years 2 months ago

I’m not sure. We have not tested it with the S19. Unless the fan is proprietary I don’t why it would not work.

1 year 11 months ago

the cables are too short, you would need a rated extention

1 year 11 months ago

The length of the cable is in line with the Fans seen on ASIC Miner; while preventing voltage drop. For specific applications get an extension but be mindful of voltage drop.

1 year 6 months ago

Solid quality Fan, a little expensive but reliable. I am looking for the datasheet for this fan. I need the PWM frequency and duration/rotation speed specs for a programmatic an air pressure equalization solution. Does anyone have suggestions where we can find the manufacturer’s datasheet for this fan?


75 reviews for Parallel TVN6100 Fan, 6100 RPM PWM Variable...

  1. 5 out of 5

    Robert Dillow (verified owner)

  2. 5 out of 5

    Anonymous (verified owner)

  3. 5 out of 5

    Tomas (verified owner)

  4. 5 out of 5

    Dan Damian (verified owner)

    Moves allot of air!

  5. 5 out of 5

    dmitry z. (verified owner)

    What can I say, these things really suck… Or blow….. Errr…. They’re great while sucking or blowing but they’re kinda noisy while doing so, so if you don’t like allot of noise during the sucking or blowing maybe get the sightly less powerful fans.

  6. 5 out of 5

    Anonymous (verified owner)

    As expected

  7. 5 out of 5

    Lee (verified owner)

    Awesome Fans!

  8. 5 out of 5

    Robert T. (verified owner)

    I am super impressed with the amount of air these fans push compared to other “server” fans from say Nanoxia. A little louder but in the summertime I will be glad I have this model. I will be ordering more.

  9. 5 out of 5

    Colby Gantt (verified owner)

    Fans work great. Priced very competitively, especially for how many RPMs this fan is rated for.

  10. 5 out of 5

    Anonymous (verified owner)

  11. 5 out of 5

    Anonymous (verified owner)

    Received fans pretty fast and will put them to good use soon!

  12. 4 out of 5

    Everett B. (verified owner)

    These products are exactly as described on their website and purchase and shipping was very simple. I would recommend Parallel Miner for anyone looking for parts for their mining equipment. I found this company looking for replacement hash boards and I would give them a 5 but I was disappointed that they only accept bitcoin payment on certain items and not other items. Overall though, great experience.

    • Joseph g (store manager)

      Over the years we have experienced the high and low of BTC-related items. The gold rush to the death of Bitcoin, not to mention the newcomers who forget their electric cost is 0.15cent Kilowatt hour. For these reasons, we not only make these items final sales but we enforce it. We value your knowledge and appreciate your business Sir.

  13. 5 out of 5

    Colin (verified owner)

    Used this to replace one of the (7000 RPM) fans that came on my ASIC, which broke after about 18 months. It doesn’t move quite as much air, but this one is *much* quieter and actually seems better balanced than the stock fans.

  14. 5 out of 5

    alex (verified owner)

    awesome quality!

  15. 5 out of 5

    Miguel W. (verified owner)

    Hello my visa card was terminated, and cannot be refunded there, can we see where the refund can be made? or keep the credit in my account in the portal?

    • Joseph g (store manager)

      We can set up an open credit for you?

  16. 5 out of 5

    Bladen S. (verified owner)

  17. 5 out of 5

    Samuel Redden (verified owner)

  18. 5 out of 5

    Bladen S. (verified owner)

    Fantastic products like always. Excellent shipping time and an over all wonderful transaction.

  19. 5 out of 5

    Steen Jacobsen (verified owner)

  20. 5 out of 5

    Anonymous (verified owner)

  21. 5 out of 5

    Barry M. (verified owner)

    Great fans but very loud. I got them running at half speed which is sufficient airflow here.

  22. 5 out of 5

    Makana A. (verified owner)

    Amazing product i have 7 GPUS in my server case and temps were as high as 72 Celsius, once I installed these bad boys my temps are now as low as 49 Celsius this is a must have if your mining 24/7. Thank you Parallel Miner <333

  23. 5 out of 5

    Jon Moore (verified owner)

    You all are the best!!!!

  24. 3 out of 5

    Essa Albastaki (verified owner)

    1 of the 7 fans unfortunately reached broken, but the others are good
    Thank you

    • Joseph g (store manager)

      Use the contact us page and attached a picture, we would be happy to send you a replacement. Thank you

  25. 5 out of 5

    Sanjeev Kumar (verified owner)

    Order processing speed can be improved further!

  26. 3 out of 5

    johnny Camp (verified owner)

    Fedex Shipping is awful. I still haven’t received the package so it’s hard to review properly at this moment.

  27. 1 out of 5

    Balford (verified owner)

    Fans are not 6100 rpm reported by ant miner s9

  28. 5 out of 5

    francis (verified owner)

    Arrived fast and its working

  29. 5 out of 5

    Anonymous (verified owner)

    Max speed is obviously loud, but at around 50% speed these fans are fairly quiet and still move ridiculous amounts of air.

  30. 5 out of 5

    Anonymous (verified owner)

    It shipped fast

  31. 5 out of 5

    omari g. (verified owner)

    Sheeesh!!!! That is all

  32. 5 out of 5

    yimamuaishan nuermaimaiti (verified owner)


  33. 5 out of 5

    j (verified owner)

    bought about 10 of these the past 2 years.(either directly from you or through ebay)i use these as exhaust fans on a grooming van.they work very hard.and im happy to say i dont have a problem getting around a year of service out of sure I’ll be back for more.

  34. 2 out of 5

    Manideep Bhimavarapu (verified owner)

  35. 5 out of 5

    Vincent L. (verified owner)

  36. 5 out of 5

    Gary (verified owner)

  37. 5 out of 5

    Gary W. (verified owner)

  38. 5 out of 5

    Gary (verified owner)

  39. 5 out of 5

    Ken Puglisi (verified owner)

    ken puglisi

  40. 5 out of 5

    Dallas P. (verified owner)

    Good but loud

  41. 5 out of 5

    Harold B. (verified owner)

    These are LOUD at full blast but even when it’s moderated to 50% or more the fans provide very good airflow. Just don’t expect these fans to push a lot of air and still be quiet. For my situation the trade off for better air flow is worth the noise.

  42. 5 out of 5

    Dan L. (verified owner)

    Excellent product!

  43. 5 out of 5

    Jaye Gary (verified owner)

    Fans move air away from 8GPU rig very effectively.

  44. 5 out of 5

    Hristo (verified owner)

    Great server level quality fans. Planning to buy more. Keeps my 3080TI cooler in the mining rig.

  45. 5 out of 5

    Juan Guzman (verified owner)

    These fans are great, not for the faint of heart, their suggested cfm and rpm performance is not false advertising at all. The downside is they are loud! I’m talking leaf blower loud. If not properly secured they will move the frame or case due to vibration. Lastly for some reason I cannot control their speed no matter which way I connect them, either to breakoutboard or directly on the MB, I even went into bios and set manual fan speed control and nothing, just 100% balls to the wall lmao. Even attempting to control their speed though software is not possible for some reason. So i have ordered a multi fan controller and hope that allows me to tame these monstrous cfm movers.

  46. 5 out of 5

    berad (verified owner)

    Juan Guzman –> be careful with any multi fan controller considering the wattage of these fans. Also even one of them will blow past the mobo header current capacity of about 1 amp. The ZSX has a fan hub that can take a few of them. You need a special cable to give it a PWM signal. Can get it from parallel miner or file down a cable that comes with many MSI motherboards for RGB control, or use I think JST connectors from amazon. Originally I set each of the chassis fan outputs on the mobo to different PWM percentages independant of temperature and then just connected the one that I wanted. More recently I found a better solution. Noctua makes a little fan hub with a dialable PWM signal that can take (but doesnt need) a signal from the mobo. So you can just plug that right into the breakout board input for PWM and now all your big fans have speed control with a little knob. 26 canadian dollars on amazon. A little expensive but it saves me having to make my own.

  47. 5 out of 5

    Samuel omar Herrera (verified owner)

    Best mining purchase

  48. 5 out of 5

    Lowell Farmer (verified owner)

  49. 5 out of 5

    Mark T. (verified owner)

    Great Service and product

  50. 5 out of 5

    Adrian (verified owner)

    This fan is seriously awesome!
    Moves a f*#k-ton of air!

  51. 5 out of 5

    Mark T. (verified owner)

    Great transaction and part

  52. 4 out of 5

    Clayton (verified owner)

    These move hella air. Only issue is that the airflow fans out quite a bit. These would be ideal to upgrade a server case, but aren’t as effective in an open air case as I intended them.

  53. 5 out of 5

    Jeffrey R. (verified owner)

    These fans are BEAST product of a cool down miner. It’s a little loud but speed n cool down makes it a number 5 star

  54. 5 out of 5

    Mark T. (verified owner)

    Works great good transaction

  55. 5 out of 5

    Tony V. (verified owner)

    Item and service is exceptional, I recommend this site and it’s products.

  56. 5 out of 5

    Bryan (verified owner)

    great product ], fast delivery, replys when ask for help

  57. 5 out of 5

    Mark T. (verified owner)

    Great purchase

  58. 5 out of 5

    Mark T. (verified owner)

    Great purchase

  59. 1 out of 5

    Robert Philippi (verified owner)

  60. 4 out of 5

    Sebastian (verified owner)

    2 out of 14 fans were unusable. Started RMA process but haven’t heard back from sellers yet. Not sure how to proceed… :/

    • Joseph g (store manager)

      Hi Sebastian, please contact me on our contact page and give me your RMA #. Thank you

    • Joseph g (store manager)

      I have sent you an email via our ticket system. If you don’t see it please check your SPAM box. Thank you

  61. 5 out of 5

    j (verified owner)

    4th or 5th time buying these….i guess i like them.

  62. 5 out of 5

    joebelson (verified owner)

    Powerful reliable fans (PWM speed controlled). thy are a expensive, but they deliver as advertised.

  63. 5 out of 5

    Petr M. (verified owner)

    Let me tell you about a powerful 4.5”-4 3/4” fan! Impressed

  64. 5 out of 5

    j (verified owner)

    fine product…and as always lightning fast shipping.

  65. 5 out of 5

    Ron (verified owner)

  66. 5 out of 5

    Matt P. (verified owner)

    Shipped fast and works great with my L3+. Thanks

  67. 5 out of 5

    Scott S. (verified owner)

    Fans are working great

  68. 3 out of 5

    bensam123 (verified owner)

    I don’t know how long they’ll last, which could take a month to years… However, immediately worth pointing out, the cable is about 4 inches too short to reach the bottom fan spots on S19s.

    Regardless of longevity, if it doesn’t even accomplish it’s intended purpose to save them maybe less then a penny on wire, it’s worth knocking 2 stars off.

    If the wire situation is improved, please update the description of the fan. Not ordering more till that happens.

  69. 5 out of 5

    Philip A. (verified owner)

    Decent fans. Shipped fast.

  70. 5 out of 5

    Anonymous (verified owner)

    Fast shipping and these things really move some air. Perfect!

Add a review