Product Description
Power supply kit for all of your 12v DIY projects
This DIY LED breakout board and server power supply kit gives you the option of either HP 750w or HP 1200w. Power all of your DIY needs, whether it's LED lighting for Christmas or any other projects, with this adaptable PSU kit. Includes breakout board adapter version X4 with 12 positive/negative screw terminals supporting up to 14 AWG cables. Features a LED voltage reader and on/off power button that retains its state and automatically powers back on when power is available in the event of power loss.
DIY LED Breakout Board Component Specifications:
X-Adapter Rev:4 Breakout Board Features:
- 125 Amps rated at 12 volt
- LED display voltage meter onboard
- Push button on / off switch
- 12 positive/negative screw terminals
HP 1200w Power Supply:
- Input Voltage: 100-240v
- 100v Max Output: 800w
- 110-120v Max Output: 900w
- 200-240v Max Output: 1200w
- Plug: C13
- Efficiency Rating: 80 Plus Platinum 94%
HP 750w Power Supply:
- Input voltage: 100-240v
- Max Output @ 100-240v: 750w
- Plug: C13
- Efficiency Rating: 80 Plus Gold 92%
Bare Wire Stranded Copper Cable Specifications:
- Connector A: 2 loose copper wires, coated as pictured
- Connector B: 6pin male PCIe
- Length: 26 inches
- Gauge: 14AWG
Package Contents:
- Your choice in HP Power Supply: 750W or 1200W
- (0, 6, or 12) Two Wire 14AWG 6-Pin PCIE to Open End cables
- (1) Breakout Board Adapter Rev: 4
- 30-day warranty
- POWER CORD NOT INCLUDED
**Main picture is for reference only. You will only receive what is stated in package contents above** Main photo credit: user bizeek
Tim (verified owner) –
Great product. Quick shipping.
Michael (verified owner) –
PS works, wiring adapter works, quickly shipped! A+
Timothy (verified owner) –
This was my first purchase with Parallel Miner. Shipping was fast and the power supply and board were as described.
Yvan (verified owner) –
Good process, good shipping speed. The unit does work and that’s important 🙂
I plan to use this to power many LED’s on a patio deck. I did a tryout with 1 controller and it all worked out well. The fan in almost idle even with only 75W of load was a bit noisy, since I plan to have this outdoor mounted within a box and under a deck, it may help to control the fan noise. The breaker board I think is great, though the cables included have connectors on both sides, I didn’t realize it was the X4, otherwise I wouldn’t ask for the cables, no big deal.
I look forward to mount and power the whole system.
Brian M. (verified owner) –
Looks solidly built, have not used it but i have it for another project. So I cannot wait to test it out.
Mark P. (verified owner) –
Sean B. (verified owner) –
Parallel Miner is great! I’ll be a return customer for sure!