.

X6B 8 Port Chain Sync Breakout Board for HP DELTA LITE-ON Server Power Supply use in ASIC or GPU Mining

Sale!
Mine bitcoin with the X6B Breakout board featuring (8) PCIe ports, LED voltage meter, on/off power button, molex port, and (2) 4 pin ports
IMG_0027IMG_0029(3) X11 boards connected by interconnect sync cables for mining bitcoin power supplyMine bitcoin with the X6B Breakout board featuring (8) PCIe ports, LED voltage meter, on/off power button, molex port, and (2) 4 pin portsLED voltage display close up on the X6B breakout board
4.53 out of 5 based on 30 customer ratings
(34 customer reviews)

$13.45

Built-in (8) PCI-E connectors on board for quick easy connect. 120Amps rated. It can power ASIC Miners as well as GPU.  Multiple modes available

669 in stock

SKU: X6BBRK Category: Tags: , , , , , , , , GTIN: 719826774995

Product Description

Compatible with Delta, OEM's 750w / 1100w / 1200w / 1400w / 1500w / 2400watt Power Supply +More to Mine Bitcoin

Built from it’s predecessor the X6B retains the quality of the X8 while adding several new features not seen in the industry.  It is compatible with two different types of PSU layout, it is backward compatible as a replacement for the X7 and X8 and it can operate in multiple modes. Use this adapter with ASIC miner and GPU mining rigs to mine bitcoin and other cryptocurrencies. Featured modes include:

  1. Standalone
  2. Couple with an ATX power supply for GPU mining with Sync ON/OFF
  3. Interconnected for synchronicity ON/OFF: Up to 20 tested possibly more.
  4. Dual PSU to Single hashing board fault protection Dual fault protection means "If one PSU fails the second PSU will shut off"
  5. XRMT-V1 remote management add-on module. While the X6B is interconnected, use the optional remote power management module to remotely manage ON-OFF / Schedule Restart.

Breakout Board Specifications:

  • Support up to 120Amp / 1400Watts
  • Electronic on /off switch. Retains its state
  • 8 PCIe ports, for 6pin connectors
  • LED indicator lights: Yellow (receiving power) and Green (pushing power)
  • On-board LED volt meter display
  • Protective bottom plate
  • Our Patent Pending Chain Sync Feature through our X6B, X7B, X11, X12, X15, and X20 Breakout boards is done by connecting the interconnect cable from PSU 1 to PSU2, PSU 2 to PSU 3, and so on. Feature tested with up to 20 PSU in a Daisy Chain.

Includes:

  • (1) X6B Breakout board
  • Inter connect cable, 1 to 2 X6B  - One cable is included for each additional breakout board purchased together
  • X6B Manual sheet available here as a PDF
  • 30-day warranty

Power Supply Compatibility List

  • Note: Not compatible with Dell power supply with Dell Part Number: TCVRR, 0GVHPX, or 0XCHHD.
  • 460 Watts:
    • DPS-460EB A, HSTNS-PD14, HSTNS-PL14, 499249-001, 499250-101, 499250-201, 511777-001, 503296-B21, HSTNS-PL23B, PS-2461-6C1-LF, 591553-001, 591555-201, 599381-001, DPS-460MB A, HSTNS-PL28, PS-2461-7C-LF, 643931-001, 643954-201, 660184-001, 656362-B21, HSTNS-PR28-AD, HSTNS-PL28-AD, 7001613-J100, 746071-001, 748279-201, 748279-301, 742515-001, 739252-B21
  • 750 Watts:
    • DPS-750RB-A, HSTNS-PL18, 506821-001, 506822-201, 511778-001, 512327-B21, DPS-750RB-A, HSTNS-PD18, 506822-101, 506821-001, 511778-001, 512327-B21, HSTNS-PL12, 449838-001, 449840-001, 454353-001, DPS-750AB-4 A, HSTNS-PD31, 674890-001, 666375-101, 674275-B21, DPS-750UB B, HSTNS-PD22B, 591556-101, 591554-001, 599383-001, 593831-B21, DPS-750AB-3 A, HSTNS-PD29, 643932-001, 643955-101, 660183-001, 656363-B21, HSTNS-PL29-AD, PS-2751-7CB-LF, 746072-001, 748281-201, 742516-001, 739254-B21, HSTNS-PF04, HPM-S-0750DDL00, 619671-401, 639173-001, 636673-B21, HSTNS-PL34, PS-2751-9C-LF, 697579-001, 700287-001, 697554-201, 697581-B21
  • 1100 Watts:
    • 03MJJP, 0Y613G, 01Y45R, L1100A-S0, PS-2112-2D-LF, PS-2112-2D1-LF, 09PG9X, 0W933G, PS-2112-2L, 0XVKF0, PS-2112-2L LF, 09K3M9
  • 1200 Watts:
    • DPS-1200LB C, MVKTR-LF, DPS-1200FB A, HSTNS-PD11, 440785-001, 438202-001, 438202-002, HSTNS-PL30, 643933-001, DPS-1200FB-1 A, HSTNS-PD19, 570451-001, 570451-101, 579229-001, DPS-1200SB A, HSTNS-PD30, 643933-001, 643956-101, 660185-001, 643956-201, 656364-B21
  • 1400 Watts:
    • PS-2142-2L, PS-2142-2L LF, 0Y53VG, DPS-1200MB A, D1200E-S0, 0MYV71, 04V04J, DPS-1200MB-1 A, D1200E-S1, 0RN0HH, 0CN35N, DPS-1200MB-1 B, D1200E-S2, 0J8HPV, 0FRVCP, DPS-1200MB-1 C
  • 1500 Watts:
    • HSTNS-PL33, PS-2152-1C-LF, 684529-001, 684530-201, 704604-001, 684532-B21

X11 Breakout Board - Parallel Miner

Additional Information

Weight 0.25 lbs
Condition

new
Manufacturer

Parallel Miner
MPN

X6BBRK
PCIE Port

8
Max Amprage

120 amps
Max Wattage

1400W
on /off switch

Retains its state
UPC

719826774995

Got something to discuss?

Customer
Newinmining
2 years 6 months ago

will this breakout board work for the ASUS B250 MINING EXPERT POWER KIT. FOR THE MBOARD + GPU’S W/ REMOTE MODULE. REV1B as a subsitute for the x11 breakout boards and work with the ZSX breakout board?

0
∧ | ∨   -     
Customer
HAYES LOFQUIST
2 years 6 months ago

If the molex is for power out, why is it a male plug?

0
∧ | ∨   -     
Support
Joseph g
2 years 6 months ago

No, the Molex is not for power out. Please see the following article for detailed info about these components and their function. https://www.youtube.com/embed/KYPKXVuHFWc?rel=0

0
∧ | ∨   -     
Customer
Dsb8QZ0b
2 years 1 month ago

Can I bypass the on/off switch? I would like to control this from a smart plug remotely.

0
∧ | ∨   -     
Support
Joseph g
2 years 1 month ago

There is a Molex 4pin HDD power plug on the breakout board. If it senses a change on the 5volts pin it will trigger an ON/OFF. This was designed to be connected with Molex power from an ATX PSU but could work with another 5volt power source. A smart plug would cut off the power directly to the PSU, this would work also as the breakout board will retain its states. So if it was on when the power was cut off, it will be back on when the power is restored

0
∧ | ∨   -     
Customer
Kurt Kutsugeras
1 year 3 months ago

I seem to have an issue with this board only one of the two led lights are on. The board turns on briefly then shuts off when only one gpu is hooked up any ideas?

1
∧ | ∨   -     
Customer
Jason Isbell
1 year 1 month ago

Yes, the board is faulty. These boards have a high failure rate. I have had 4 fail in 3 months. If you have your heart set on using this setup, you’ll need to order extra boards so you will keep your downtime to a minimum.

2
∧ | ∨   -     
 

34 reviews for X6B 8 Port Chain Sync Breakout Board...

  1. 5 out of 5

    msummersjr –

    Simply the VERY best breakout boards available! There are absolutely no comparisons when it comes the the quality and functionality of these boards. Beware of cheap knock-offs that pose fire hazards and have faulty sync functions that will damage your expensive equipment. I have tried them all and without question, the boards offered by Parallel Miner are the very best!

  2. 5 out of 5

    Jack E. (verified owner) –

    As always, exactly what I wanted, order shipped immediately and answers to questions were prompt.

  3. 5 out of 5

    Peter B. (verified owner) –

    Works perfectly.

  4. 5 out of 5

    Troy D. (verified owner) –

    works great, fast delivery seems good quality 5/5

  5. 5 out of 5

    Anonymous (verified owner) –

  6. 5 out of 5

    Randall M. (verified owner) –

    Exactly what I needed at a great price!

  7. 5 out of 5

    clayton roberge (verified owner) –

    I love your products, super fast shipping. I’ve done a few orders and everything has been amazing.

  8. 1 out of 5

    Ben (verified owner) –

    Never received the product in the mail. The tracking information never showed that it shipped.

    • Joseph g (store manager) –

      Ben, I’m looking into it. You are right the tracking is stalled.. Be right back

    • Joseph g (store manager) –

      I’m reshipping you another one tomorrow FedEx 2 days. I’m not sure what happened. You will get a tracking update by email tomorrow. Sorry about this.

  9. 5 out of 5

    Steven (verified owner) –

    Still waiting on my sync cables but great product. Thank you

  10. 5 out of 5

    Dung Le (verified owner) –

  11. 5 out of 5

    Renny Schweiger (verified owner) –

    Ordered 2 of the X6B but got the X11 instead. Said they were out of stock on the X6B and this is the same board, just with more output connectors, so no issues. One of the boards has a bad ‘on’ LED — the yellow LED glows when the power is connected to the power supply on both boards, but when the on/off button is pressed, only one of the boards has the green LED working. Again, not a problem as the numeric display lights up with the available voltage. Had a question and customer support answered it satisfactorily. Shipping to Canada was good/prompt, so no issues there. I’ve not yet integrated the product into my solution, but so far so good.

  12. 5 out of 5

    andrew (verified owner) –

  13. 5 out of 5

    Anonymous (verified owner) –

  14. 5 out of 5

    Andrew Wild (verified owner) –

    Very nice nice breakout board

  15. 5 out of 5

    Barton B. (verified owner) –

    great value for larger GPU cards where you don’t need a lot of connectors

  16. 5 out of 5

    STEPHANE CAVATASSI (verified owner) –

    I was waiting for this so easy to use, will never buy ATX anymore

  17. 4 out of 5

    Brandon (verified owner) –

    Received the X11 instead but worked just the same plus extra ports

    • Joseph g (store manager) –

      Enjoy the free upgrade.

  18. 5 out of 5

    Anonymous (verified owner) –

  19. 5 out of 5

    michael obrien (verified owner) –

  20. 5 out of 5

    Brian (verified owner) –

    Love these cards for my dual PSU 8GPU mining rigs

  21. 5 out of 5

    Mohammed (verified owner) –

  22. 5 out of 5

    David Wing (verified owner) –

    Excellent products and very fast shipping, even with international shipments. Thank you for providing excellent customer service and products.

  23. 5 out of 5

    Ryan M. (verified owner) –

    I only ordered this because I broke mine being stupid …. these are solid running boards

  24. 2 out of 5

    Jason Isbell (verified owner) –

    I’ve had 2 of these fail quickly on 2 different rigs for no apparent reason. 1 was in about 60 days after receiving and 1 about 90 days. If you are going to use these understand why they only give them a 30 day warranty, so make sure you buy extra to reduce rig down time. You’ll be replacing them frequently.

  25. 2 out of 5

    Nathaniel Evans (verified owner) –

    Have had 5 of these go out over the last 3 months across 4 power supplies. They work well until they no longer work at all. This time I bought a few extras to reduce downtime the next time one fails.

    • Joseph g (store manager) –

      Reach out to us on our contact page. We will replace them for you

  26. 5 out of 5

    Anonymous (verified owner) –

  27. 2 out of 5

    Walter Hylenski (verified owner) –

    Had purchased two of these and a total of four breakout boards and have had in less than 6 months, had two boards fail. Hoping this is a fluke but the odds are not great.

  28. 5 out of 5

    John C. (verified owner) –

    super fast shipping great prices

  29. 5 out of 5

    Stephen Waliszewski (verified owner) –

    Smooth transaction. Fast shipping

  30. 5 out of 5

    Anonymous (verified owner) –

    Perfect every time!

Add a review

Related Products