HP 94% Platinum Obelisk SC1 Slim/Dual POWER SUPPLY 1200 / 900 WATT 110-240V
This HP 1200 Watt Obelisk SC1 Power Supply kit is built using our X-adapter revision X6B for all versions of the ASIC miner, including SC1 Slim and SC1 Dual. Designed and tested to run in a 24/7/365 mining environment. Our Patent Pending Chain Sync Feature through our X6B, X7B, or X11 Breakout boards is done by connecting the interconnect cable from PSU 1 to PSU2 then PSU 2 to PSU 3; feature tested with up to 20 PSUs.
Obelisk SC1 Miner Power Consumptions:
- SC1 Gen 1, 2 boards: 400-500W at the wall
- SC1 Gen 1, 3 boards: 600 to 750W at the wall
- SC1 Slim: 400-500W at the wall
- SC1 Dual: 800-900W at the wall
Obelisk SC1 Slim/Dual Power Supply Specifications:
- Input: 110V-240V
- Max Output @ 110-120V: 900 Watt
- Max Output @ 200-240V: 1200 Watt
- Input Connector: C13
- Efficiency Rating: 80 Plus Platinum 94%
- (1) Original HP 1200W PSU
- (6) Pair 16AWG 6pin to 6pin PCIe cables
- (1) Rev:6B X-Adapter
- (4) 3M Rubber foot pads
- X6B Manual sheet available here as a PDF
- POWER CORD NOT INCLUDED.
80+ Platinum 94% Certification :
With the increased popularity of ASIC and GPU mining, many overseas and domestic sellers are taking advantage of the lack of knowledge of some users. We have seen an increase of sellers passing these HP 1200W PSUs as 94% Platinum rated. The only HP platinum 1200W PSU in the market are the ones with the following part numbers: 570451-101, 643956-101, 643956-201, 748283-201. If you bought a HP 1200W PSU and it does not have these part numbers, IT IS NOT 94% PLATINUM CERTIFIED.