Cable Kit for ZSX / Amp Breakout Board 24-Pin ATX CPU Power and Molex SATA Splitter

4.50 out of 5 based on 12 customer ratings
(12 customer reviews)

$12.99

24-Pin ATX, CPU power cable & Molex to SATA Molex Splitter Cable Kit for ZSX Breakout Board

1308 in stock

Warranty: 30 Days

Product Description

Cable Kit for ZSX / Amp Breakout Board 24-Pin ATX CPU Power and Molex SATA Splitter

Package contents:

  • Heavy Duty 24-Pin ATX / CPU Power Cable 24" Long
  • Molex to SATA / Molex Splitter Power Cable 12" Long

Compatible with the ZSX and ZSX-Amp breakout boards. Do not attempt to use the SATA/Molex splitter cable with anything other than our breakout boards. Please refer to our ZSX user manual and wiring guide before use.

ZSX board pictured for reference only and is not included with purchase.

Additional Information

Weight 1 lbs
Dimensions 6 × 6 × 3 in
Condition

new

Breakout Board Compatibility

ZSXBRK, ZSXBRK-AMP

Cable 1

24-pin ATX to 24-pin ATX & 4/8-pin CPU power

Cable 2

Molex to SATA / Molex Splitter

Got something to discuss?


Customer
rymanalo
5 months 3 days ago

Is this ATX cable new? Can this handle more than 180 watts and help power GPUs directly connected to the motherboard?

Customer
Nicholas Johnston
4 months 14 days ago

I wouldn’t use this to power GPUs through the motherboard. If you’re going to be drawing a significant fraction of the 180W rating of the ZSX or picopsu (50% is my threshold) then I’d strongly recommend powering the EPS connector on the motherboard directly from the 6 pin pcie power ports of the ZSX board. There are pcie 8 pin to eps 8 pin adapters on amazon for ~$10 or you can just grab a female EPS connector (from mainframe customs or moddiy, likely others as well) and swap the female 6 pin on a parallel miner pcie power cable for an 8 pin eps with 2 pins missing. Just make sure you have the pinout correct, otherwise you can swap ground and +12V on your motherboard, which I’d expect to take out quite a bit of hardware.

It would be really great if parallel miner could create a 24″ pcie 6 pin to eps 4+4 (or eps 8 pin, i don’t think 4+4 is relevant anymore) cable to match the atx cable on the ZSX module. I personally am running ryzen cpus on my rigs now to mine on the CPUs as well, and the 180W power limit prohibits running the higher end chips like the 3900x with complete confidence.

Customer
schen0228
14 days 19 hours ago

Can this be used to power a board that is CPU mining? For example a 3700x or 3900x mining monero

Support
14 days 17 hours ago

That cable set is proprietary to be used with a ZSX breakout board ONLY. The ZSX board Motherboard side is maxed out at 200watt. Just enough to power a mining rig with GPU’s on risers but not enough for CPU mining

 

12 reviews for Cable Kit for ZSX / Amp Breakout...

  1. 5 out of 5

    Chris Tackett (verified owner)

  2. 5 out of 5

    JAKE (verified owner)

    Durable. Great quality!

  3. 5 out of 5

    Jacob (verified owner)

  4. 5 out of 5

    Victor (verified owner)

  5. 3 out of 5

    Jacques van der Westhuizen (verified owner)

  6. 5 out of 5

    Alexis (verified owner)

    PCI to SATA missing

  7. 1 out of 5

    Anonymous (verified owner)

    The 24 pin atx cable does not work and is defective. Fortunately i ordered a backup 24 pin cable and it works.

  8. 5 out of 5

    Chris Robert D. (verified owner)

  9. 5 out of 5

    Anonymous (verified owner)

  10. 5 out of 5

    Casey H. (verified owner)

    Works perfectly with my H110 BTC+ Pro

  11. 5 out of 5

    David (verified owner)

    The team has always been great with responding to a new miners questions. In addition it is great knowing you are receiving good quality equipment from them. I have checked their cables and they are what they say they are. Breakout boards are the best in the business!

  12. 5 out of 5

    Tamer Alwakeel (verified owner)

Add a review

You may also like…